background image

Features

Structure

Introduction

• Stainless Steel and Pyrex Construction
• 510 Connection
• Child Lock Top and Bottom
• Easy Top Fill
• Compatible with;

- XO 0.5Ohm SS Coil (Stainless Steel)

 (Direct Lung)

- XO 1.8Ohm Kanthal Coil

     (Mouth-to-Lung)

- XO 0.2 Ni200 Coil

(Temperature Control)

Child-Lock

Exchange the Coil Head

How to Top Fill

User manual

Cleaning & Maintaining 

When necessary clean the components (except the coil head) by 
washing with clean water and air drying the components. 

The  glass  tank  should  not  be  impacted,  dropped,  or  mishandled. 
Doing so could damage the glass tube and injury may occur. 

This product is not intended for use by any one under the age 
of 18.  Do not operate or heat the coil outside of its designed 
container.  Doing so may cause serious injury as the coil can reach 
high temperatures. Seek medical advice if you feel unwell or are 
pregnant. Not recommended for young people or non-smokers. 
There are no recorded medical side effects for this product.

Bypass mode should only be used by advanced users with a good 
understanding of Ohm’s law and battery cell safety. Failure to do 
this may result in thermal runaway or serious injury. All usual time 
and voltage protections still apply.

Liberty Flights is not liable for any malfunction of any mods or 
battery,  injury or death related to use of separate batteries and 
mods made by other manufacturers. Do not operate in the rain. 
Do not expose it to water when attached to a battery device. 

Warning

Drip Tip

Bottom Cap

Pyrex Glass Tube

Top Cap (Child-Lock)

Airflow Control

Coil Head 

46mm

23mm

12mm

TANK

TANK

User Manual 

The XO Tank is 

leak free

, has 

child locking 

safety features

 and the 

dual lines design 

keeps the tank cool and the vapour 
production plentiful.

Contents;

1 x XO Tank (2ml)
2 x Coils (See each coil 
for resistance)
1 x Replacement Glass 
1 x Set Replacement O-Rings

The XO Tank features innovative 
child-lock technology sealing the tank 
from the top and bottom when full.  
To release the top and bottom cap, firstly 
press down and unscrew the top cap and 
remove, once removed grasp the internal 
section and unscrew the bottom cap. 
Once the bottom cap is removed the 
outer glass tube can slide down and 
be replaced.

To learn more about our products and vaping contact: 

XO atomizer heads and accessories are 

designed and manufactured with a high 

consumer focus. Utilising advanced 

methods of manufacturing and material 

selection, these XO atomizer heads 

deliver a consistent vape every time.

CAUTION

1. These coils utilise organic cotton wick, 

please do not activate without the presence 
of e-liquid.

2. It is recommended to saturate the coil prior 

to vaping, please allow 3 minutes for coil to 
saturate before firing.

COILS

COILS

To fill your XO Tank, firstly 
push down and screw off the 
child lock top cap and place to 
one side. Once removed place 
the nozzle of your e-liquid 
bottle directly into one of the 
two filling ports in the top of 
the device. Be careful not to 
insert the nozzle into the 
centre shaft.

Fill the tank with  
e-liquid to the top. 
Use the glass as an 
indicator. Ensure 
the unused fill port is 
free from obstruction 
as this releases air 
during filling.

1. Screw off the child-lock top cap
2. Hold internal section and screw off base
3. Screw out and discard old coil head
4. Prime coil head with 2-3 drops of e-liquid
5. Screw in new, primed coil head
6. Re-attach tank section to base
7. Fill tank via top filling port, attach top cap and enjoy

1.

2.

3.

4.

5.

6.

Hold

Hold

Hold

Hold

Twist off base

Press down

& Twist

X

2.6mm

nib

3.0mm

holes

TANK

Once full please allow 
3 minutes before vaping.. 

www.liberty-flights.co.uk

8-9 Arkwright Court, Darwen, 

Lancashire, BB3 0FG

Tel. 0345 257 9008

XO Coils

The XO Tank comes with 2 atomizer  heads please find  
below the various heads that fit the XO Tank.

0.5Ohm SS (Stainless Steel) - Perfect for temperature 
control (SS Mode) vaping or higher wattages and 

direct 

lung inhales.

1.8Ohm Kanthal - Tighter airflow draw through the coil. 
Perfect for

 mouth to lung inhales.

 (Not temperature 

mode compatible)

0.2Ohm Ni200 - Perfect for temperature control (Ni 
Mode) vaping and

 direct lung inhales. 

(Please note these 

coils only work in XO Dynamic and  XO Cloudchaser kits 
and other temperature control devices)

0.2

Ω

 NI200

(

Temperature Control

0.5

Ω

 SS

(Direct Lung inhale)

1.8

Ω

 Kanthal

(Mouth-to-Lung inhale)

(

Reviews: