Features
1. Reflector Trim:
Low brightness, anodized aluminum or Comfort Clear™
with integral flange in painted white or polished to match inside of cone.
2. Lamp Holder Assembly:
Unitized optics insure alignment of lamp and aper-
ture cone. Integral C-shaped media holder accepts up to two 4 3/4" dia. media.
3. Trim Adjustment Mechanism:
Provides 40° vertical tilt, 360° + horizontal
rotation; lockable. EZ-Aim Helical Drive System provides fast
and accurate hot aiming with Philips screwdriver.
4. Socket:
Medium base porcelain socket with nickel plated screwshell.
5. Frame Housing:
Steel, 0.029" (22-Ga.), matte black finish.
6. Frame Vertical Adjustment Mechanism:
Accommodates mounting to
virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
7. Mounting Bars:
Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
8. Retention Springs:
Rust resistant springs secure trim for quick, tool-less
installation.
9. Ballast / Cover Assembly:
Accessible from below and removable without
tools for inspection and ballast replacement .
10. Junction Box:
0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
11. Thermal Protector:
(Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast:
120V or 277V, 50/60 Hz. Electronic, encased, high power fac-
tor, T.H.D. <15%, thermally and transient protected, RMI/RFI complies with FCC
part 18 non-consumer limits, shut-down circuit at end of lamp life, sound
rating "A", -5°F minimum starting temperature, Type 1 Outdoor rating.
Ballast
ANSI Code
Voltage
Max. Amps Input Watts
70W MH
M98/M143
120/277
0.67/0.28
78
100W MH
M90/M140
120/277
0.90/0.43
110
Options and Accessories
Chicago Plenum:
Consult Factory
Labels:
UL (Suitable For Damp Locations)
7" (176 mm) Dia.
5 3/4" (146 mm) Dia.
15
"
(3
81
m
m
)
10-5/8"
(270 mm)
20" (508 mm) to
30" (762 mm)
April 12, 04
S
Top View
(Electronic Ballast)
20-1/4" (514 mm)
19
-1
/8
"
(4
86
m
m
)
3
p
Ceiling Cutout:
6 9/16" (167mm) Dia.
Reflector Trim
Frame-In Kit
Lamp
C6P38MHA CLW
Specular Clear, White Painted Flange.
C6A70P38E1
Electronic 120V
70W
PAR38 Ceramic MH
CLP
Specular Clear, Matching Flange.
C6A70P38E2
Electronic 277V
70W
PAR38 Ceramic MH
CCDW
Comfort Clear Diffuse, White Painted Flange.
C6A10P38E1
Electronic 120V
100W
PAR38 Ceramic MH
CCDP
Comfort Clear Diffuse, Matching Flange.
C6A10P38E2
Electronic 277V
100W
PAR38 Ceramic MH
CCZW
Champagne Bronze, White Painted Flange.
CCZP
Champagne Bronze, Matching Flange.
Calculite
®
HID Adjustable Accent
C6P38MHA
Page 1 of 2
6" Aperture, PAR38 Ceramic Metal Halide
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • D0711
