ProSpec
™
Track Lighting
26056
Page 1 of 2
PAR56 Line Voltage
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • B0705
Features
1. Track Attachment Fitting:
Machined aluminum. Polarity is not a concern
with ProSpec track because of its symmetrical positioning of circuits within
the track, adapter is reversed to access one or the other circuit.
2. Steel Clamping Toggles:
1/8” thick plated steel with 1/4 - 20 thread
secures fixture mechanically to track.
3. Electrical Post:
.20 x .032 thick brass contacts enclosed in a high tempera-
ture thermoplastic insulator.
4. Clamping Knobs:
Rotation of clamping knobs secures steel clamping tog-
gles to track.
5. Lever:
Solid steel. Energizes fixture electrically by 90° rotation.
6. Yoke:
1/8” thick x 1” wide solid steel.
7. Housing:
1/16” thick aluminum.
8. Lamp Adjustment Knob:
Knurled steel. Can be moved in housing slot to
rotate lamp 180°. Knob is tightened to lock lamp in desired position.
9. Accessory Locking Knob:
Knurled steel. Locks accessory cartridge in
desired position after adjustments.
10. Lamp Access Knob:
Knurled steel. Locks front housing to fixture.
Loosening provides access for adding accessories and lamp replacement.
11. Stem:
5/8” O.D. x .048” wall steel.
12. Accessory Cartridge:
Can be rotated 360° and locked into position.
13. Lamp Guard:
Tempered clear glass. Required for safety.
14. Cross Blade:
.07” thick x 1 3/8” deep steel blades matte black finish,
removable.
15. Lampholder:
High temperature ceramic mogul end prong base with high
temperature #18 gauge fiberglass sleeved wire.
16. Fixture Rotation Knob:
High temperature plastic. When loose, allows fix-
ture to be rotated. When tight the fixture is locked into position.
17. Horizontal Lock:
Steel collar when tightened locks the fixture in its horizon-
tal position.
18. Lamp Guide:
1/16” thick steel. Ensures lamp is seated properly in fixture.
24. Visual Cutoff:
57° at 0° fixture aiming.
Ordering Information
Catalog No. Finishes Mountings
Approx. Wt.
Lamps
26056 WH
Matte White
ProSpec
™
Track System
5.6 lbs. (w/lamp,
PAR56
26056 BK
Matte Black
Ceiling, Vertical Wall and Horizontal Wall
2 lenses & crossblade)
120V Mogul
26056 WHCY
Matte White
Canopy mounted over a 4” Octagon Junction Box, Ceiling or Wall
5.8 lbs. (w/lamp,
End Prong
26056 BKCY
Matte Black
(or other electrical box with 3.5” mounting centers. 4 7/8” dia. fixture canopy must cover J-box)
2 lenses & crossblade)
500W max.
26056 WHPC
Matte White
Pipe Clamp: Fits Round Pipes. 3/4” to 1/12” nominal pipe size. Horizontal or Vertical pipe. 7.5 lbs. (w/lamp,
(not included)
26056 BKPC
Matte Black
Note: 3/4” nominal pipe measures 1.05” O.D., 1 1/2” nominal pipe measures 1.90” O.D.
2 lenses & crossblade)
Finish
All painted finishes are baked enamel.
Options & Accessories
(2) Accessories max. Use 6 1/4” UV, PF, SY, LF, IR, AS, AS7LS and AL7HC plus
6 1/4” color filters.
Electrical
Input to fixture must be 120V rms at 60Hz.
26056PC plugs into grounded parallel blade receptacle.
26056CY fixture wires: 18 ga. stranded SF-1. Supply wire must be rated at least
90°C and min. 6 amps capacity.
Labels
UL, I.B.E.W., Not For Residential Use.
10-1/4"
8-5/8"
9-9/16"
7-1/8"
6-1/2
DIA.
8-7/8
Dia.
1
2
3
4
5
6
7
8
6-1/8"
7-7/16"
4-7/8"
ProSpec Track System
9
10
11
12
13
14
15
16
17
18
6"
6-1/2
DIA.
Canopy Mount 26056WHCY/26056BKCY
10-1/2"
21
20
22
23
19. Canopy:
.047 thick
steel.
20. Switch:
Tungsten
rated switch allows
fixture to be
switched on or off
without disconnect-
ing wires.
21. Pipe Clamp
: Altman 510
malleable cast iron clamp.
22. Male Plug:
Grounded
parallel blade plug 3' long
cord.
23. Safety Hook:
1/16" dia.
steel cable with ìSî hook
provides additional support
to structure.
6-1/8"
4-1/8"
4-7/8" Dia.
3/4"
19
20
7-1/16
Pipe Clamp 26056WHPC/26056BKPC
Teflon
®
is a registered trademark of E.I. DuPont.
