For Factory Technical Information: (978) 657-7600 • Fax (978) 658-0595
05/10
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © Philips Group
Section7/Folio Q20-32 REV. F
Sealatron Enclosed Industrial Fluorescent
STW Series
Page 1 of 2
Wet /Damp Locations, Rapid Start, Slimline/High Output
1 or 2 Lamp T5, T5HO, T8, T8HO or T12HO
Features
•
Wet Location
-Areas of high humidity, water vapor, rain, incidental water spray, or
other non-corrosive or non-flammable liquid. (UL-Listed)
• NSF Certified for Non-Food Zone installation.
• IP67 rating.
• Acceptable for outdoor as well as indoor installations.
• One-piece impact resistant, non-conductive, non-corrosive housing, reinforced
polyester fiberglass housing.
• Smooth exterior surface for easy cleaning.
• Lighting channel has high reflectance baked white enamel finish.
• Two gasketed threaded (1/2" trade size) wet location hubs installed on ends.
• High impact DR acrylic molded lens.
• Crepe pattern inner surface lens.
• Continuous, compressible, closed-cell neoprene gasket bonded to housing.
• ABS lock-tight plastic molded cam-action tension latches.
• K.O.’s provided throughout for easy access.
• Can be surface (wall/ceiling) or suspended mounted unless otherwise specified.
•
Mounting brackets available, order separately.
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Mounting Methods
Dimensions
virgin acrylic lens opens
easily, hinges either side
cam action tension latches
Shallow Lens Version
(Standard)
Deep Lens Version
for high ambient, or
when 800mA lamps
are operated on
T12HO ballasts.
