manualshive.com logo in svg

Lindab FNC1, Installation Booklet

The Lindab FNC1 is a high-quality air duct fitting, designed to ensure efficient air flow in commercial and industrial settings. For detailed installation instructions, download the free Installation Booklet from our website. This manual provides step-by-step guidance on setting up your FNC1 for optimal performance.

Share
Download
background image

English

Installation booklet

FIRE DAMPER

CIRCULAR SERIES FNC1 - 300 Pa

Cert. N° 1812-CPR-1639
 

This is a 14 page installation booklet. 

For further information please refer to the Technical Manual.

As the manufacturer is constantly improving its products, the aesthetic or dimensional features, the technical data, the equipment and acces-

sories indicated could be subject to variations.

www.mp3-italia.it

*1MUBFNC1EN* rev 20-12

*1MUBFNC1EN*

FNC1

 

FNC1 

 

l i n d a b     |     w e   s i m p l i f y   c o n s t r u c t i o n

www.lindab.com - Fire dampers are manufactured by MP3 Srl www.mp3-italia.it

*1MUBFNC1EN-LIND* rev 20-12

*1MUBFNC1EN-LIND*

For further information please refer to the Technical Manual.
As the manufacturer is constantly improving its products, the aesthetic or dimensional features, the technical data, the equipment and accessories indicated could be subject to variations.

Installation booklet

This is a 14 page installation booklet. 

English

FIRE DAMPER

CIRCULAR SERIES FNC1 - 300 Pa

Cert. N° 1812-CPR-1639

 

Summary of Contents for FNC1















Reviews:

No comments

Related manuals for FNC1

Brands by name

Popular brands

Load more brands