Solar Motion Security LED Light
EM-SL245B
Introduction
.
We congratulate you on the purchase of your LED Solar Sensor Light. You have chosen a high quality
product. Before using your LED Solar Sensor Light, please familiarize yourself with the instructions and
safety information below. Only use the product as described and for the specified applications.
This product is intended to illuminate outdoor areas for private use and is not suitable for commercial use
or for use in other applications.
Technical Data
Material: PC+ABS
LED Type: 88*3014
Battery: 1*3.7V 18650 1800mA (included)
Solar Panel: 6V 600mA 3.5W, size:5.9*7.9in
Motion sensor angle: 140º
Detection range: approx. 26.2ft -39.4ft
Time setting: approx. 3seconds to 7min (+/-10%)
Lumen: 280LM (+/-10%)
Protection type: IP44(splash-proof)
General safety instructions
.
1. Children should not be allowed to play with the product. Cleaning and user maintenance should not be
performed by children without adult supervision.
2. Never leave children unsupervised with the packaging material. The packaging material represents a
danger of suffocation.
3. Do not use this product if you notice any damage
4. The illuminants are not replaceable. If the illuminants fail, the entire product must be replaced
Function
The LED light will switch on during twilight or darkness when the motion detector
detects infrared radiation given off by people passing by.
User can turn the control knob TIME to adjust the duration of the illumination from approx. 3 seconds to 7
minutes (+/-10%).
User can turn the control knob LUX to adjust the daylight level at which to activate the motion detector.
Note:
Once the light is activated by the motion detector, any subsequent detection will restart the timed
period again from the beginning.
Note:
The motion detector responds to heat radiation. When outdoor temperatures are low, it is more
