LINSN LED TECHNOLOGY CO., LTD
.
Tel
:
+86-755-36513042
,
Fax
:
+86-755-36984024 Website:
Address:Building 3,Sanlian Industrial Park,Shiyan Town,Bao'an District,Shenzhen,China.
MC100 LED Player Instructions
Initial Startup
output
：
as below You can use the HDMI / DVI adapter cable attached to the sending card. or you can also connect
the Gigabit output port to the receiver card directly(Note: if the big screen is not displayed,pls select the
appropriate receiver card in the display settings of the software, see below, "how to choose to receive the
card?" ).
Then starting to see a picture
After completion of the moment just started, you'll see a short blue
screen.
if connect the internet right,you will see the IP address
if not connect the internet ,it looks like this :NULL
If the player can work with the network, you can use the computer directly to control large screen,it is
very
convenient. Youcan put
network cable into the player's Ethernet port directly
the, then connect with the
exchanger on the other side.
How to set the screen size?
Installation MC100 Setup.exe ,or download MC100at:
Download Center
Run MC100 Program edit management software on the computer
. Click "Main Menu -> View-> LED
screen settings."
initial password:168
,
named LED here and specify its size, as well as other settings
type of receiving card, you can enter SendCard page, set " Recv Card Model ".
After setting, it must be uploaded to the LED. One is through the Internet (prior to the player network cable
connected), one is through U disk.
