background image

PENNSYLVANIA K4 STREAMLINER

OPERATING AND MAINTENANCE INSTRUCTIONS

The Lionel Smithsonian Collection

     © 1994 

Lionel Trains Incorporated, Chesterfield, MI  48051-2493

The Lionel Smithsonian Collection Pennsylvania K4 streamlined locomotive model is 

constructed of formed and fabricated brass and therefore must be handled differently 

than a traditional diecast Lionel steam locomotive.  Although the model is very sturdily 

built, the body and particularly the details are more susceptible to damage by careless 

handling than other Lionel models.  Care must be exercised when removing the locomo-

tive from the packaging as well as during general handling to avoid damaging the model.

This Lionel Smithsonian Collection locomotive model is designed to operate on Direct 

Current (DC) electricity.  Any application of Alternating Current (AC) as is supplied by 

most traditional Lionel power supplies 

WILL DESTROY THE INTERNAL ELECTRONICS 

OF THIS MODEL

.  The Lionel Smithsonian Collection will not be responsible for dam-

age caused by the application of AC power to the model.  Please see your warranty 

registration card for further details.

The Lionel Smithsonian Collection K4 locomotive model was designed to operate only 

on two rail track with a minimum radius of 50 inches.  Although the track gauge is the 

same as traditional Lionel three rail track, the locomotive will not operate on any of the 

various three rail track systems available.  Attempting to operate the K4 on three rail 

track may cause damage to your DC power supply or the locomotive model itself.

can be activated  by briefly moving the controller switch forward  once to turn  the bell 

on and again to turn the bell off.

NOTE: 

 

If the tender sound system switch or controller bell switch are left on, 

the batteries will be drained of power even if all connections are not  complete.

SMOKE UNIT OPERATION

The Lionel Smithsonian K4 is equipped with a smoke generator.  To place in operation 

make certain that the control switch (located under the  left side skirt) is in the on position.  

Using liquid smoke drops available from your Lionel dealer, half fill the smoke cylinder 

located in the exhaust stack of the model. If you overfill the smoke generator, you will 

not obtain desirable results.  Should this occur, use a cotton swab to wick out some of 

the fluid.  To preserve the finish of the locomotive avoid prolonged contact of the smoke 

fluid with the painted surfaces of the model.

LOCOMOTIVE CARE AND MAINTENANCE

The only routine maintenance that should be required is periodic lubrication as outlined 

under 'Preparing the Locomotive For Operation' and replacement of the sound system 

batteries.  It is advisable to periodically check the tightness of the small fasteners used 

to assemble the side rods, valve gear and other small detailing to make certain that 

parts will not be lost.

To install, remove or replace the single 9 volt battery in the sound system control unit 

follow these procedures:

 

1)  Cover your work surface with a  piece of foam or a soft towel.

 

2)  Place the sound unit control box face down on the padding.

 

3)  Remove the four rubber feet from the bottom of the control box.

 

4)  Using a small phillips head screw driver, remove the four screws located  

 

     under the rubber feet.

 

5)  Remove the back of the sound unit control box.

 

6)  Install, replace or remove the 9 volt battery.

 

7)  Reverse above procedure to assemble the control unit.

DISPLAY CASE CARE AND MAINTENANCE

The roller base is manufactured from furniture grade materials and should be cared for 

accordingly.  The wood should be regularly dusted with a soft cotton cloth.  Any stains 

or marks which may not come off during dusting may be cleaned utilizing a residue-free 

furniture cleaner.

The clear acrylic cover should be regularly dusted with a soft cotton cloth.  Extreme 

care should be taken not to exert undue force on the cover as this can result in scratch 

marks.  Should the cover be scratched or have a difficult stain to remove, plastic polish 

as is sold for record player 'dust' covers may be used.  With care, no cleaning beyond 

regular dusting should be necessary.

SERVICE

The Lionel Smithsonian K4 comes with a limited lifetime warranty to the original 

owner.  Additional information and instructions outlining this warranty and service is 

available on the warranty registration card included with this manual.

  

Reviews: