background image

!

KEEP INSTRUCTIONS FOR FUTURE USE

!

READ

 all instructions 

BEFORE

 assembly and

 

USE

 of the product.

!

Check installation after assembly and 
periodically at least once a month to 
ensure unit correctly installed.

!

Adult assembly required. 

!

CAUTION: FOLLOW ASSEMBLY 
INSTRUCTIONS OF THE PRESSURE GATE 
AS EACH GATE MAY ASSEMBLE 
DIFFERENTLY.

While one 
person can 
assemble this 
item, it is 
recommended 
that two people 
work together 
for easier 
assembly.

PRN: AIM-LPA1103-LPN [16.09.14]

PART LIST

Grip Tape

Silicone 
Anti Slip 
Material

Light

 (x1)

Front View

Back View

 LPA1103

EZ-FIT CHILDREN'S AND PET GATE WALL PROTECTOR WITH LIGHT

 (x1)

Front View

Silicone 
Anti Slip 
Material

PPI Label Location

LPA1 LLC.

customercare@rbollc.com

Model #: LPA1103-X

Date Code: MMYYYY-ZZZ

Back View

Grip Tape

Large Panel

Small Panel

1

!

Keep the batteries out of children's reach.

!

Any battery may leak battery 

acid if mixed with a different battery type, if inserted incorrectly (put in 

backwards) or if all batteries are not replaced or recharged at the same time. Do not mix old and new 
batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. 

!

Any battery may leak battery a

cid or explode if disposed of in fire or an attempt is made to charge a 

battery not intended to be recharged. Never recharge a cell of one type in a recharger made for a cell 
of another type.

!

Discard  leaky  batteries  immediately. 

Leaky  batteries  can  cause  skin  burns  or  other  personal  injury. 

When discarding batteries, be sure to dispose of them in the proper manner, according to your state 
and local regulations. 

!

Always remove batteries if 

the product is not going to be used for a month or more. Batteries left in the 

unit may leak and cause damage.

 

!

Recommended  type  batteries—

alkaline  disposables,  3AAA.  NEVER  mix  battery  types.  Change 

batteries when product ceases to operate satisfactorily.

TROUBLESHOOTING: 

If your device is not functioning properly, check for the following problems: 

1. No batteries in electronics module. 
2. Batteries dead. 
3. Batteries in backwards—check “+” and “-”. 
4.Corrosion on battery terminals. Rotate batteries in place against terminals, or clean with sandpaper or 

steel wool if corrosion is severe. 

5. Batteries too weak. 

If you still have problems, call our toll-free number: 1.800.704.9058 or 

email: customercare@rbollc.com

IMPORTANT INFORMATION REGARDING BATTERIES

USEFUL TIP

Summary of Contents for LPA1103

Page 1: ...ard carbon zinc or rechargeable nickel cadmium batteries Any battery may leak battery acid or explode if disposed of in fire or an attempt is made to charge a battery not intended to be recharged Never recharge a cell of one type in a recharger made for a cell of another type Discard leaky batteries immediately Leaky batteries can cause skin burns or other personal injury When discarding batteries...

Page 2: ...witch Push in to activate the sensor light Push in again to prevent light from coming on when Motion occurs around light Once batteries are installed it is recommended to test your light to ensure product works correctly before you install onto the base To do this turn on the light and find a dark area and move hand in front of sensor Light is programed to stay on for 15 seconds 7 8 9 2 10 11 NOT ...

Page 3: ...GHTLY FOR CORRECT INSTALLATION TOP REMOVING THE LIGHT UNLOCKED PUSH REMOVE 12 TIGHTEN GATE Insert a small pointed tool such as a paperclip or pencil into the hole to depress the tab to unlock 13 14 15 16 17 Assembly of your EZ Fit protector is easier if you have help An extra set of hands to hold the unit in place while you tighten the gate is recommended TOP TIGHTEN GATE ...

Page 4: ...om on both side on first step Need a second set of two small round EZ Fit Protectors please call or order on line EZ Fit Gate Adaptor kit One SET Top and Top on both sides of wall with base boards One SET Top and Bottom on one side on first step And EZ Fit Gate Adapter kit To order the EZ fit gate call or order on line One SET Top and Top on both sides of wall with base boards DIFFERENT OPTIONS FO...

Reviews: