background image

CONTENTS

My First Drone

ª

My First Drone

ª

AGES 4+ YEARS

ADULT SUPERVISION REQUIRED

ADULT BATTERY INSTALLATION REQUIRED

SKU: 643347

A. 1 Drone

B. 1 Remote Control

A.

Illustrations are for reference only. Styles may vary from actual contents.

CAUTION: KEEP FINGERS AWAY 

FROM SPINNING PROPELLERS

DRONE AND REMOTE CONTROL PARTS

QUICK START

1) Install 6 “AA” (LR6) batteries in the remote control. 
2) Charge the drone’s battery for 30-40 minutes. 
3) Turn on the drone.
4) Turn on the remote control and point the receiver on the remote towards the drone.
5) Use the buttons on the remote control to fly your drone in an open, indoor area.

NOTE: Please read all instructions before use and keep this manual for future reference.

B.

Before beginning, an adult must install fresh alkaline batteries. Here’s how:

1.  Using a Phillips screwdriver (not included), remove the screw and battery compartment cover 

located on the back of the remote.  

 

2.  Install

 

six (6) fresh 1.5V AA (LR6) alkaline batteries (not included) making sure the (+) and (-) ends 

face the proper direction as indicated inside the battery compartment.  

3.  Replace the compartment cover and tighten the screw.

BATTERY INSTALLATION

CHARGING THE DRONE

FLYING THE DRONE

PROTECTIVE RINGS

STABILIZER

STABILIZER LINKAGE

CHARGING 

SOCKET

POWER 

SWITCH

ROTOR BLADES

SKID

POWER INDICATOR

POWER SWITCH

RIGHT TURN

LANDING

CHARGING PLUG

EMERGENCY 

STOP

TAKE OFF

LEFT TURN

6 x AA Batteries

1.5V AA/

LR6

1.5V AA/

LR6

1.5V AA/

LR6

1.5V AA/

LR6

1.5V AA/

LR6

1.5V AA/

LR6

RECEIVER

Take out the charging cable from the 

bottom of the remote. 

1

Turn the drone OFF (O/   ) and insert the cable 

into the charging station under the drone. 

O

I = ON

O = OFF

O

O

Turn ON (I /   ) the remote control. The light under the 

headlights will light up green. It will turn off when it 

is fully charged. Unplug the charging cable and 

replace the cord in the unit. 

2

3

• If the drone crashes, switch the remote control and the drone to the OFF positions.  Carefully check that no 

damage was done to the drone in the crash before turning the unit on again.

• For best results, use the drone away from bright lights to ensure the receiver can detect the remote control. 

• Do not cover the receiver on the remote control or on the drone.

• Keep the remote control within 15 feet (5 meters) of the drone to avoid loss of reception.

HELPFUL FLYING TIPS

Turn the drone ON (I). The power LEDs on the headlights will flash. 

1

Place the drone on a flat surface and stand three feet away with the remote control 

receiver pointing towards the drone. 

2

Turn the remote control ON (I/   ). The power indicator will light up.

3

3 FEET

O/

O

O

EMERGENCY STOP:

If the drone crashes, press the stop button to 

stop the propellers. Turn the drone and remote 

control off. Examine the drone for any damage 

before switching it on and flying again. 

I /

I /

I /

I /

Reviews: