Note:
An active connection will be dropped if you close the User GUI window
unless ‘No GUI
R
equired’ is selected in the Admin GUI Internet Connection configuration.
© Livewire Connections Ltd
www.livewire-connections.com
1. Select to connect to named service.
2. Select to disconnect all services.
3. Use the drop down to select which Firewall Group will be applied.
4. Select to apply preconfigured Firewall Settings for the selected Firewall Group (#3).
5. Counter displays the volume and time of data measured at the WAN interface.
6. Current Connection Status and Error messages.
7. Status of the connection between the Modem Device and the Internet.
8. Icon representing the current connection as defined in the Service Template.
9. Status of the connection between the Access Controller and the Modem Device.
Access Controller FB-10
Bridge Card
