LOB-GW-HYB-WMBUS
Wireless M-Bus Gateway V3
Quick Start Guide (EN)
Manufacturer
í
Lobaro GmbH | Stadtdeich 7 | D-20097 Hamburg | Germany
support@lobaro.de | www.lobaro.de
Important notes
^
This document is a quick reference guide.
A sup-
plementary product description is available online at
https://doc.lobaro.com
.
,
The device is powered by an internal, replaceable 3.6V lithium
battery (Li-SOCl2), which is subject to transport restrictions.
Hazardous material class: 9A. The applicable transport regula-
tions must be met when transporting the device incl. inserted
battery. The battery must not be connected during transport!
The test certificates for the approved batteries are available on
request.
,
This product must be installed professionally and in accordance
with the specified installation guidelines and may therefore only
be installed by trained and qualified personnel. For installa-
tion in structures with increased fire protection requirements,
e.g. staircases, escape routes, the installation company or the
qualified personnel must ensure that the specific requirements
according to local building regulations are fulfilled!
,
These instructions must be read carefully before initial opera-
tion, followed and kept for the entire service life of the device.
Intended use
The
Lobaro Wireless M-Bus Gateway V3
receives data telegrams from up
to 500 utility meters with standardized 868 MHz wireless M-Bus interface
and forwards them downstream via NB-IoT cellular radio or alternatively
LoRaWAN to the Internet for further processing or evaluation.
In addition to the unidirectional wireless M-Bus modes
C1, T1 and S1
,
the proprietary
Sensus RF
radio protocol is also supported by the radio
receiver in the gateway.
The previously received meter data is transferred to the Lobaro IoT plat-
form, optionally encrypted via DTLS, and can be viewed there or down-
loaded as a CSV file. Alternatively, the connection of other downstream
third-party systems via standardized APIs from the Lobaro platform is
easily possible.
