LS-LC-30D/35D FIRE SAFE USER
MANUAL
STEP 1 – OPENING THE SAFE:
1. PRESS THE
START
KEY. THE
LCD DISPLAY
WILL SHOW “--------“.
2. ENTER THE ACCESS CODE. (Default code is: “0-0-0-0”)
3. PRESS THE
START
KEY, AND THE
LCD DISPLAY
WILL SHOW
“
OPEN”
.
4. TURN THE KNOB TO OPEN THE DOOR.
STEP 2 – CHANGING THE USER CODE
1. OPEN THE SAFE DOOR (see STEP 1 above)
2. PRESS THE RED
RESET BUTTON
(located in the center of the door on the
back side), THE
LCD DISPLAY
WILL SHOW “
SET-CODE”
.
3. WHILE THE LCD IS ALLUMINATED, ENTER YOUR NEW CODE (3-8
DIGITS) AND PRESS THE
START
KEY.
•
THE
LCD
WILL SHOW “
IN”
.
•
YOUR NEW CODE WILL BRIEFLY FLASH ON THE LCD
4. YOUR CODE IS NOW SET.
STEP 3 – CHANGING MASTER CODE
1. OPEN THE SAFE DOOR (see STEP 1 above)
2. PRESS THE
SETUP BUTTON
(LOCATED IN BACK OF DOOR), THE
LCD
DISPLAY
WILL SHOW “
SET-CODE”
.
3. PRESS THE
START
KEY, THE
LCD DISPLAY
WILL SHOW
OLD-CODE
.
4. WHILE THE
LCD
IS ALLUMINATED, ENTER THE CURRENT
MASTER
CODE
(the default is : “8-8-8-8”) AND PRESS THE
START
KEY (the
LCD
will
display
“SET”
.
•
ENTER YOUR NEW
MASTER CODE
(3-8 DIGITS) - the
LCD
DISPLAY
will show “
RE-INPUT”
.
•
ENTER YOUR NEW
MASTER CODE
AGAIN - the
LCD
DISPLAY
will show “
IN”
AND
WILL BRIEFLY SHOW YOUR NEW
MASTER CODE
.
YOUR
MASTER CODE
IS NOW SET
https://www.supplychimp.com/
