background image

GB-4

GB-5

      

SAFETY FIRST!

For your continued safety and to reduce the risk of injury or electric shock, please 

follow all the safety precautions listed below.

• Read all the instructions carefully before using this appliance and keep them for 

future reference.

• Retain the manual. If you pass the appliance on to a third party, make sure to include 

this manual.

• Unplug the appliance from the mains socket when not in use, or before cleaning any 

part of the appliance.

• Allow the appliance to completely cool down before cleaning.
• Never immerse the appliance in water and always keep the electrical contacts dry.
• Never place the appliance on or near a source of heat such as a cooker ring or gas 

flame.

• Always place the appliance on a dry, flat and stable surface.
• Avoid contact with the steam from the appliance’s spout. Take care when pouring or 

refilling after boiling.

• To prevent boiling dry, do not fill the appliance with water less than the minimum fill 

level as indicated on the appliance.

• Use the appliance to heat only water.
• Do not interfere with the normal working of the switch.
• Always keep the appliance out of the reach of small children. Children should be 

taught about the dangers of boiling water.

• This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instructions concerning the use of the 

appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.
• If the mains cable is damaged it must be replaced by the manufacturer, its service 

agent, or similarly qualified persons in order to avoid a hazard.

• Do not let the mains cable hang over the edge of the work surface or allow it to 

touch hot surfaces or sources of heat or flame.

• This appliance is intended to be used in households and similar places such as:

- Staff kitchen areas in shops, offices and other work places.
- By clients in motels, hotels and Bed & Breakfast establishments.

DSG Retail Ltd • Maylands Avenue • Hemel Hempstead 

Herts • HP2 7TG • England

Visit Partmaster.co.uk today for the easiest way to buy 

electrical spares and  accessories. With over 1 million 

spares and accessories available we can deliver direct to 

your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK 

customers only). Calls charged at National Rate.

This symbol on the product or in the instructions means that your 

electrical and electronic equipment should be disposed at the end of its 

life separately from your household waste. There are separate collection 

systems for recycling in the EU. For more information, please contact the 

local authority or your retailer where you purchased the product. 

(P.N. L17KPS12-003)

Stainless Steel Kettle

Instruction Manual
L17KPS12

Thank you

 

for purchasing your new Logik Kettle.

We recommend that you spend some time reading this instruction 
manual in order to fully understand all the operational features it 
offers. 

Read all the safety instructions carefully before use and keep this 
instruction manual for future reference.

       SPECIFICATIONS

Mains supply:  

220-240V~50Hz

Power consumption:   1850-2200W

We continually strive to improve our products. Specifications may change without 

prior notice.

Replacement Part

Part Number

NOTE: If you require a replacement for any of the items listed below, please 

quote their corresponding part numbers:

Kettle Stand

L17KPS12-005

Scale Filter

L17KPS12-006

Ensure the kettle is cool before removing the filter.

        CLEANING THE REMOVABLE SCALE FILTER

To prevent loose particles of limescale being poured into your beverage, your 

kettle is fitted with a scale filter. You may remove the filter and fit it back in after 

cleaning.

1. To remove the filter, open the lid.

2. Push out firmly on the inside of the 

filter, lift up and remove.

3. To fit the filter, open the lid.

4. Place the filter inside the spout, 

ensuring the bottom hook rests in its 

match inside the spout.

5. Push down on the lip of the filter. It 

will click into place.

90˚

90˚

C

M

Y

CM

MY

CY

CMY

K

L17KPS12_IB_RC_final120731_BW.pdf   1   31/7/12   3:51 PM

Reviews: