Instruction Manual
Glass Board Mounting Instruction
52507/52508
PARTS LIST
NOTICE
Manufactured in China for S.P. Richards Co., Atlanta, GA
Board
Anchor
J Rails
Screw
A
B
C
D
SteP 1
SteP 2
SteP 3
SteP 4
SteP 5
• TIPS
LLR52507
1685mm / 2 Pcs
12 Pcs
12 Pcs
LLR52508
885mm / 2 Pcs
8 Pcs
8 Pcs
this installation
requires at least
two people.
LLR52508 board can
be mounted vertical and
horizontal.
Draw 2 parallel lines at desired height
in the same length as J rail. Keep the
distance between 2 lines at 29 5/16".
Align J rail under each line.
Mark the holes position of each J rail.
Drill 1/4" diameter hole as per marked position.
then hammer anchor into each hole.
Mount 2 J rails with screws.
Hang the board on 2 J rails.
Hang lower brackets
into lower J rail. ensure
all lower brackets are
in J rail.
A
Push board
against the wall.
B
Lift board up
slightly.
C
Install upper
brackets into
upper J rail.
D
Use total 12pcs screws for LLR52507
Use total 8pcs screws for LLR52508
29 5/16"
