NRENX11C
10-2005
CAL. NX11, NX14 (R23 SERIES)
C R O W N
M i n u t e h a n d
D a y
S e c o n d
h a n d
Hour hand
a b
A
D
C
■
C H A R A C T E R I S T I C S
1. Analogue & digital time displays
2. Automatic calendar
•
The calendar automatically adjusts for odd
and even months including February of leap
years up to 2050.
3. World time function
•
Time in the 77 cities and regions around the
world can be displayed. Among those 77
cities, the cities in some time zones with 30-
minute offsets from UTC are included.
•
Daylight saving time can also be set.
•
By presetting the “Home City,” you can easily
reset the display to the time in your “Home
City” after your return from abroad.
•
The time zone abbreviations in the United
States are also displayed for applicable cities.
4. 24-hour stopwatch
•
The stopwatch can measure up to 23 hours,
59 minutes and 59 seconds in 1/100-second
increments for the first 60 minutes and in 1-
second increments thereafter.
5. Countdown timer
•
The timer can be set up to 9 hours and 59
minutes in 1-minute increments.
6. Regular alarm
•
The regular alarm sounds once every 24 hours
at the designated time.
•
You can preview the alarm sound by using the
sound demonstration function.
•
The hourly time signal can also be set.
7. Single-time alarm
•
The Single-time alarm sounds only once at a
d e s i g n a t e d t i m e a n d i t i s d i s e n g a g e d
automatically.
8. Illuminating light
(Electroluminescent panel)
•
The built-in electroluminescent backlight
illuminates the display for approximately 3
seconds for easy viewing in darkness.
■
D I S P L AY S A N D C R O W N O P E R AT I O N
NOTES
✥
Setting the second
To reset the second digits to “00,” press either
“C” or “D” in accordance with a time signal
while the second digits are flashing. If “C” or
“D” is pressed while the second digits count
any number between “30” and “59,” one
minute is added and the second digits are
immediately reset to “00.”
✥
Once the year, month and date have been
set, the day of the week is automatically set.
✥
12-/24-hour indication setting
• When the 12-hour indication is selected,
“AM” indicator appears for the morning and
“PM” indicator appears from the afternoon.
• When setting the hour digits in the 12-hour
indication, check that the AM/PM is properly
set.
This watch is equipped with the world time
function which enables you to view the time in
the 77 cities and regions around the world.
By presetting the “Home City,” even if you set the
watch to display the time of the place you are
staying while traveling abroad, you can easily
and conveniently reset the watch to display the
time of your “Home City” after your return home.
For details, refer to “RETURNING TO THE “HOME
CITY” DISPLAY.”
1. Press and hold “A” for 2 to 3 seconds.
The city code currently selected will flash at
A
B
C
“ H O M E ” m a r k
City code
3. Press “C” or “D” to set the flashing item.
4. Press “A” to confirm the settings and return
to the TIME/CALENDAR mode.
* To set the city, select the city code
representing the city which is in the
same time zone as the city you are
wearing this watch. For information on
city codes and their time zones, refer to
“ CITIES AND TIME DIFFERENCES.”
“HOME CITY” SETTING
