XDesignerPlus Ver2.0 Communication Manual
1 / 13
LS Industrial Systems Co., Ltd.
XGT(XGK-CPU), XGB(XBC-CPU/XBM-CPU) Series
FENET Driver
Support version
OS
V4.0 and over
XDesignerPlus
4.0.0.0 and over
CONTENTS
Thank you for using TOP series of M2I corporation.
Please read this manual carefully to know connection methods and
procedures of “TOP to External device”
1.
System configuration
Page 2
A section for showing connectable external devices, serial signal
types, connection configurations. Refer this section to select the
right system configuration.
2.
Selection of TOP, External device
Page3
A section for selecting a Top model and the external device.
3.
Example of system setting
Page 4
A section for explaining examples to connect communications of
TOP to External Device.
Select the correct example in your case according to “1. System
configuration”.
4.
Communication setting
Page 8
A section for Communication setting.
The setting should be the same with the external device.
5.
Usable address
Page 10
A section for usable address to communicate with external
device.