1
3D Printing with the Lulzbot Taz Workhorse
***WARNING***
THE 3D PRINTER IS EXTREMELY HOT. DO NOT TOUCH ANY PART OF THE PRINTER ONCE HEATING HAS
STARTED OR WHILE THE PRINTER IS IN MOTION.
BY USING THE EQUIPMENT YOU ARE CONFIRMING THAT:
•
YOU HAVE PERMISSION TO REPRODUCE THE MODEL YOU ARE PRINTING.
•
THE LIBRARY WILL TAKE NO RESPONSIBILITY FOR ANY COPYRIGHT VIOLATIONS YOU MAY INCUR AS A
RESULT OF USING THE ROOM, ITS EQUIPMENT AND/OR SOFTWARE.
IMPORTANT TERMS:
PLA Filament
:
The printer
’
s
‘
ink
’.
Slicing
:
The process of preparing your 3D model to print.
Filament Support
:
Extra filament to hold up or support parts of the print, especially overhanging parts.
Raft:
A layer of filament at the base of your print that helps with stabilization and bed adhesion.
Brim:
Holds down the edges of your print to prevent warping. Brim uses less filament then raft.
PRINTER PARTS:
Power Switch
Tool Head
Filament
Guide
Tube
Filament
Holder
Heated Bed
Filament
Path
Extruder Idler
Extruder Idler
Adjustment knob
Nozzle
3D PRINTER 2 (PEGASUS)
-
STANDARD PRINTS
