7921R / 7921KD / 7931R / 7931KD: SERIES
BATH SEAT
ASSEMBLY & OPERATION INSTRUCTIONS
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE USE
PARA INSTRUCCIONES EN ESPAÑOL, VÉASE LA PÁGINA 5
7921KD-1-INS-LAB-RevC14
1
Info: The most current version of these instructions can be found online at
www.grahamfield.com
.
IMPORTANT SAFETY INFORMATION: PLEASE READ
WARNING: Important! Read and understand these instructions before
assembling or using the Bath Seat. If you do not understand any part
of these warnings, cautions or instructions, contact a healthcare
professional for direction in the use of this product. If the Bath Seat is
not properly assembled and adjusted, personal injury and damage to
the Bath Seat could result.
WARNING: If components are damaged or missing, contact your
Graham-Field distributor immediately. DO NOT use substitute parts.
Use only Lumex replacement parts. Non-Lumex replacement parts
could cause personal injury and damage to the Bath Seat.
WARNING: Notice for California Customers- California Proposition 65
WARNING: This product contains a chemical known to the State of
California to cause cancer and reproductive or developmental harm.
WARNING: GF Health Products, Inc. assumes no responsibility for any
damage or injury caused by improper assembly or use of this product.
INTENDED USE
The Bath Seat is intended for use by individuals who require seating support while
bathing or showering. It is designed to be placed fully inside the bathtub or shower.
Contraindications
WARNING: This product has a maximum weight capacity of 350 lb,
EVENLY DISTRIBUTED.
WARNING: DO NOT use this product as a transfer bench or climbing
device.
WARNING: Use this product only with tub floors wider than 18
3
/
4
″.
ASSEMBLY
Remove the Bath Seat from the box and place it on a flat, dry surface.
