Product Name:
Gray Cement Column Outdoor Fountain with LED Light
SKU #:
WHF988
Contact: sales@winsomehouse.com
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Quantity
Fountain
1
Pump w/ Adaptor
1
Compatible Pumps for this fountain:
Pump Model No.
JR450/LED
JB450/LED
YH707/LED
Tools required for assembly:
No tools required for assembly.
Assembly Instructions:
1.
Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2.
Select a flat, level surface for the assembly and final location of your fountain.
3.
Place base on a flat surface. From the opening at the back of the fountain, insert the water supply tube into
the pump outlet.
4.
Connect the fountains LED cord to the pump's LED cord and twist to tighten. Lead the pump power cord out
through the cord slot at the back opening and connect to plug.
5.
Make sure the water tube is properly connected with the pump, and is not crimped.
6.
Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly.
7.
Please do not use the electrical plug in wet weather conditions. Please note: On first use, there may be air in
the pump. It may take several minutes until all the air escapes.
