REV A
IN 40-120003-01
Page
1
of
2
Wiring Assembly Instructions
40-120003-01 Contact, Receiver, Micro Power, Crimp, 23 Amp, 14 Awg Max
.
Fig. A.
(Contact Sub-Assembly)
Contact Crimp Information Table
Wire
Type
Wire
Awg.
Strip Length In
Inches
Crimp Tool
Hex Die Set/
Positioner
Indicator
Selector
No.
Heat-shrink
Length X Dia.
Stranded
18
16
14
A) 1/4”
A) 1/4”
A) 1/4”
452200
452221
Yellow
Yellow
Yellow
4
5
5
N/A
Pull Test Values
18 Awg
32lbs
16 Awg
39lbs
14 Awg
48lbs
(Values based on M22759/11xx)
(Example of Equipment)
NOTE 1:
Refer to
IPC/WHMA-A-620A
standard (Ch. 11.1.2) for cable lengths, measurements and tolerance.
NOTE 2:
Overall length of cable should be less 3/8” to compensate for the contact attachment.
STEP 1)
From the "Contact Crimp Information" Table, use the crimp tool and positioner set listed.
Fig. B. (Crimp Tool 452200) Detail A. (Positioner and Crimp Tool)
