1
1
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit
for additional data sheets and product information.
For further information and support please visit:
DC
-
0026091
1
MAAL-011207-QR3000
Rev. V4
Low Noise Amplifier
0.15 - 6 GHz
Functional Block Diagram
Features
•
AEC
-
Q100 Grade 2 Qualified (
-
40°C to +105°C)
•
Low Noise Figure:
•
0.60 dB @ 0.15 GHz
0.35 dB @ 1.9 GHz
0.70 dB @ 2.6 GHz
•
High Gain:
23.5 dB @ 0.15 GHz
23.0 dB @ 2.6 GHz
18.0 dB @ 6.0 GHz
•
High Linearity: 33 dBm OIP3
•
Single Voltage Bias: 3
-
5 V
•
Integrated Active Bias Circuit
•
Current Adjustable 30
-
80 mA
•
Lead
-
Free 2 mm 8
-
LD PDFN Package
•
RoHS* Compliant
Applications
This part is ideal for Automotive applications such as
Compensators and Smart Antenna Systems,
designed for V2X infrastructure technologies (either
DSRC or C
-
V2X) based Telematics Control Units
(TCUs).
Description
The MAAL
-
011207 is a high dynamic range, single
stage MMIC LNA with ultra low noise figure, high
gain and excellent linearity. This amplifier is
designed for operation from 0.15 to 6 GHz and is
housed in a lead
-
free 2 mm 8
-
lead PDFN plastic
package.
This low noise amplifier has an integrated active
bias circuit allowing direct connection to 3 V or 5 V
bias and minimizing variations over temperature and
process. The bias current is set by an external
resistor, so the user can customize the power
consumption to fit the application. V
BIAS
can be
utilized as an enable pin to power the device up and
down during operation.
In the 50
Ω
environment and at 3 V, the
MAAL
-
011207 offers 0.7 dB noise figure at 2.6 GHz,
with 23 dB of gain and over 33 dBm output third
order intercept point (OIP3).
Pin Configuration
1
1, 3, 4, 6, 8
N/C
No Connection
2
RF
IN
RF Input
5
V
BIAS
Bias Voltage
7
RF
OUT
/
V
DD
RF Output / Drain Voltage
9
Pad
2
Ground
N/C
N/C
N/C
RF
IN
N/C
V
BIAS
RF
OUT
/
V
DD
1
N/C
8
7
6
5
2
3
4
BIAS
1.
MACOM recommends connecting unused package pins to
ground.
2.
The exposed pad centered on the package bottom must be
connected to RF, DC and thermal ground.
MAAL
-
011207
-
QR3000
3000 Piece Reel
MAAL
-
011207
-
Q01SMB
5.9 GHz Sample Board
MAAL
-
011207
-
Q02SMB
0.76 GHz Sample Board
Ordering Information
3,4
3.
Reference Application Note M513 for reel size information.
4.
All sample boards include 5 loose parts.
* Restrictions on Hazardous Substances, compliant to current RoHS EU directive.
