Mad Catz 4704, Manual

Wireless Gaming Adapter Manual 

You must have at least the following 

equipment

 before you begin setup: 

• 

A Wireless Access Point (AP) or wireless Router (with

Broadband Internet 

Connection) 

• 

A Computer with an Ethernet Adapter

and CD-ROM drive 

• 

An Ethernet Cable (included)

• 

A CD-ROM (with Manual and quick installation guide)

1. Hardware 

installation: 

1-1 

Connect one end of power adapter to power port on Wireless Gaming Adapter 

and connect the other end into an available electrical outlet. Once connected, 

push Adapter's power button to turn Adapter ON.

1-2 Connect Ethernet cable between computer and Gaming Adapter’s Ethernet port.

2. Software 

installation: 

2-1 IP address setting 

        You must assign your computer a static IP address within the same range as the IP 

address of the Gaming Adapter. The Gaming Adapter’s default IP address is 

10.10.10.254 

with a Subnet mask of 

255.255.255.0

. Please see the detailed information below: 

2-1-1

 Click the Start button (it should be located at the lower-left corner of your monitor), then 

click 

Control Panel

. Double-click 

Network Connections

, then double-click 

Local Area 

Connection

, Local Area Connection Status window will appear, and then click “

Properties

” 

2-1-2 

Set the IP address of your Ethernet adapter to a specific IP address. 

In the 

IP address 

field, enter the address 

10.10.10.x

(x should be replaced by a number 

between 2 and 253,such as 101). In the 

Subnet mask 

field, enter 

255.255.255.0

.