background image

Wolfshirt2020

FX TYPE: Octave Fuzz

Based on the Foxx® Tone Machine™

Enclosure Size: 1590B, 1590B2, 125B
“Softie” compatibility: Softie1&2

© 

2020 

madbeanpedals

Overview

I’ve said more than once that the Foxx Tone Machine is my favorite fuzz/octave pedal. I think I’ve said 

the same thing about the Tychobrahe Octavia. I’ve come to accept that both statements are true :)

If the Octavia (mbp Retrograde) is the classic, Hendrix style oct-up fuzz, then the Tone Machine 

(Wolfshirt) is its unruly cousin; the one that has a few too many at family gatherings and then 

proceeds to mortify everyone. The fuzz is thicker and the octave up is more prominent. Basically, a bit 

of a face melter.

As with all analog octave up generators, the Wolfshirt is monophonic. It doesn’t do chords well at 

all with all kinds of odd harmonics taking over. But, for lead and single note playing it cuts through 

exceedingly well. The Wolfshirt also includes a switch to defeat the octave up for fuzz only and 

replaces the coupling electrolytic caps in the audio path with 1uF film caps. For mojo.

http://www.effectsdatabase.com/model/foxx/tonemachine#info

Controls

•  VOL: 

Total output.

•  SUS: 

Fuzz amount.

•  TONE: 

Low pass filter.

•  OCT : 

Left: fuzz only. Right: fuzz + octave.

Terms of Use: 

You are free to use purchased 

Wolfshirt2020 

circuit boards for both DIY and small commercial operations. You may not 

offer 

Wolfshirt2020

 PCBs for resale or as part of a “kit” in a commercial fashion. Peer to peer re-sale is fine, though.

Technical assistance

 for your build(s) is available via the 

madbeanpedals forum

. Please go there rather than emailing me for 

assistance on builds. This is because (1) I’m not always available to respond via email in a timely and continuous manner, and (2) 

posting technical problems and solutions in the forum creates a record from which other members may benefit.

Summary of Contents for Wolfshirt2020
















Reviews: