Specifications:
Length: 39.5”
Diameter 2.6”
Weight: 15oz
Recovery: 24” Nylon Chute
Motor Mount: 29mm
Fins: 3 - 1/8” Plywood
CG: 28” from nose tip
Recommended Motors:
Single
Use RMS
F20J-4
950’
F40W-7
1170’
F50T-6 1050’ G64W-7 1620’
G40W-7 1440’
G80T-7 1410’
G77R-7 1400’
Parts List
1. (1) Molded nose cone
2. (1) Pre-slotted body tube
3. (1) Forward section body tube
4. (2) Centering rings
5. (1) Bulkhead
6. (1) Eyebolt, nut & washer
7. (1) 29mm motor tube
8. (3) laser-cut fins
9. (1) Kevlar® shock cord section
10. (1) Nylon shock cord section
11. (1) 9”x9” flameproof chute protector
12. (1) 24” Nylon chute
13. (2) ¼” launch lugs
14. (1) Coupler
Required to complete
: 5 minute epoxy,
120/220 sandpaper, masking tape, finishing
filler/paint.
™
K-125
Discovery
8
98666 00125
3
®
