background image

MadgeTech, Inc.

PO Box 50 

l

 

Warner, NH 03278

Phone 603.456.2011

 

l

 

Fax 603.456.2012

www.madgetech.com

 

l

 info@madgetech.com

Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289

REV F 2010.04.12

To view the full MadgeTech product line,

visit our website at 

www.madgetech.com.

Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289

Product Information Card

RTDTemp2000

Product Quick Reference Card

RTDTemp2000

Precision RTD Based Temperature Recorder with LCD Display

Part Number

RTDTemp2000

Temperature Sensor

100Ω Platinum RTD

Temperature Range

-200 to +850°C

Temperature Resolution

0.01°C 

Calibrated Accuracy

+0.05°C (-200 to +260°C)

+0.3°C (+260 to +850°C) 

Memory

174,762 

Sample Rate

2 seconds up to 24 hours 

Required Interface Package

IFC110 or IFC200 

Typical Battery Life

1 year @ 1 minute reading rate with display off, 30 days 

typical with continuous LCD display use

Optional AC adapter available

Baud Rate

115,200

Operating Environment

-20 to +60°C 0 to 95%RH (Non-Condensing)

Materials

Black anodized aluminum

Dimensions

4.8” x 3.3” x 1.25” (122mm x 84mm x 32mm)

Approvals

-

Specifications subject to change.

See MadgeTech’s terms and conditions at www.madgetech.com

Device Maintenance

Battery Replacement

Materials:

3/32” HEX Driver (Allen Key)

Replacement Battery (U9VL-J)

- Remove the cover from the device by unscrewing the four 

screws.

- Remove the battery from its compartment and unsnap it 

from the connector.

- Snap the new battery into the terminals and verify it is secure.

- Replace the cover taking care not to pinch the wires. Screw 

the enclosure back together securely.

Note: Be sure not to over tighten the screws or strip the threads.

Battery Warning

WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD.  DO NOT 

SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, DISASSEMBLE, 

CRUSH,  PENETRATE  OR  INCINERATE.  BATTERY  MAY  LEAK  OR 

EXPLODE IF HEATED ABOVE 60°C (140°F).

Recalibration 

The RTDTemp2000 standard calibration is two points, 50

  and 

150

.

 

Pricing:

Recalibration traceable to NIST 

$60.00

Recalibration 

$40.00

 

Additional:

As Found Data 

$15.00 per parameter/channel

Verification Point 

$15.00 per point

To  send  the  devices  back,  visit  www.madgetech.com,  select  

Services

 then 

RMA Process

.

Reviews: