background image

AV9010 

1 060817

SPECIFICATIONS

Min. Hose Size ........................... 5/16" I.D.

Rec. Air Pressure ..........................90 PSIG

Avg. Air Consumption................. 3.36 CFM

Sound Level ...................................84 dBA 

Length ................................................ 5.7" 

Weight............................................1.5 lbs. 

Air Inlet Thread NPTF ......................... 1/4" 

Vibration (m/S2) ........................... 0.4m/s2

Suction...........................................9cmHg

Copyright © Professional Tool Products, 2017

All rights reserved

Operating Instructions  •   Warning Information  •  Parts Break down

AV9010

AIR 

VACUUM

 

KIT

®

Some dust created by power sanding, sawing, grinding, drilling, and 

other construction activities contains chemicals known to cause 

cancer, birth defects or other reproductive harm. Some examples of 

these chemicals are:

•  Lead from lead-based paints,
•  Crystalline silica from bricks and cement  

  and other masonry products, and
•  Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you 

do this type of work. To reduce your exposure to these chemicals: 

work in a well ventilated area, and work with approved safety 

equipment, such as those dust masks that are specially designed to 

filter out microscopic particles.

WARNING

ALWAYS READ  
INSTRUCTIONS 
BEFORE USING 
POWER TOOLS

ALWAYS WEAR  
SAFETY GOGGLES

ALWAYS WEAR 
HEARING  
PROTECTION

AVOID  
PROLONGED  
EXPOSURE TO  
VIBRATION

ALWAYS WEAR 
BREATHING 
APPARATUS  
(USERS & 
BYSTANDERS)

•  MAX AIR PRESSURE:  

90 PSIG, 6.2 BAR

WARNING

Summary of Contents for AV9010











Reviews: