background image

1

RFSUV34 Vent-Free Heater

INSTALLER: DO NOT DISCARD THIS MANUAL

Leave for homeowner.

PLEASE READ THIS
MANUAL BEFORE INSTALL-
ING AND USING APPLIANCE.

IMPORTANT: Read all instruc-
tions and warnings carefully
before starting installation.
Failure to follow these instruc-
tions may result in a possible
fire hazard and will void the
warranty.

WARNING: If the information in
this manual is not followed
exactly, a fire or explosion may
result causing property dam-
age, personal injury or loss of
life.

FOR YOUR SAFETY
Installation and service must be
performed by a qualified in-
staller, service agency, or the
gas supplier. Do not store or
use gasoline or other flammable
vapors and liquids in the vicinity
of this or any other appliance.

FOR YOUR SAFETY
If you smell gas:
1. Do not touch electrical

switches.

2. Do not try to light any appli-

ance.

3. Do not use the phone in your

building.

4. Immediately call your gas

supplier from a neighbor's
phone.

5. Follow your gas supplier's

instructions.

6. If you cannot reach your gas

supplier, call the fire depart-
ment.

This is an unvented gas-fired
heater. It uses air (oxygen) from
the room in which it is installed.
Provisions for adequate com-
bustion and ventilation air must
be provided.

RFSUV34

Installation and Homeowners

Operating Instructions

10001769

01/02   Rev. 1

Unvented

Freestanding

Model

410 Admiral Blvd., Mississauga

Ontario, Canada  L5T 2N1

www.majesticproducts.com / www.vermontcastings.com

The Vermont Castings

Majestic Products Company

Summary of Contents for RFSUV34
















Reviews: