R
EPAIR
For repairing methods, proceed in the same orders as 2414B e
xcept for swinging function at support point of 2414B.
1.Disassembling of the handle and switch
Unless the motor housing has been removed, the
handle R cannot be disconnected. To disconnect the
handle R, first remove the motor housing.
(See 2. Disassembling of the motor.)
2.Disassembling of the motor
After removing the carbon brush(2 pieces), remove
the pan head screws M5(4 pieces) for mounting the
motor housing
and pan head screws M5(3 pieces) for
mounting the handle to separate the one body of
motor housing and handle from
the gear housing, and
then you can take away the armature.
Cab tire cord
Switch button
Compression spring
Switch
Hanger
Condenser
Switch lever
Switch lock
Lead wire
from the field
Tapping screws(3 pieces)
for mounting handle R/L
Pan head screws M5(3 pieces)
for mounting handle
Pan head screws M5(3 pieces)
for mounting the handle
Pan head screws M5(4 pieces)
for mounting the motor housing
The handle R/L are fixed with 4 pieces of tappingscrews and
are mounted on the gear housing with
the 3 pan head
screws M5. To disconnect the handle
L, disconnect these 7 screws. See the figure for the switch
structure.
