background image

PRODUCT

P  1/ 1

4

Models No.

 Description

C

ONCEPT AND MAIN APPLICATIONS

S

pecification

S

tandard equipment

O

ptional  accessories

EM2650UH/ EM2650LH, 

EM2651UH/ EM2651LH
Petrol Brushcutter

Fuel tank capacity: L (oz)

Engine

Displacement: mL (cu.in.)
Fuel

Specifications

EM2650LH

Model

Type

Starting system

Loop handle

Handle style

Engine oil
Carburetor

These four 25.4mL Petrol Brushcutters have been developed as

the successor models of 

EBH252U/EBH252L

 and 

EBH253U/EBH253L

equipped with 24.5mL 4-stroke engine. 

Their main feature is the multi-position engine lubrication system.

This unique system enables the engine to be inclined to any angle

even during continuous operation with no emission of white smoke

and smell of burning engine oil for wider application range of the

brushcutters.
EM2651UH and EM2651LH

 

additionally feature rapid start.

EM2650UH and EM2651UH are Bike handle models.

EM2650LH and EM2651LH are Loop handle models.

Net weight

*4

: kg (lbs)

5.1 (11.2)

*1

 Brazil: 25E gasoline

*2

 No load speed of the cutting tool

*3

 Of asymmetrical design

*4

 Dry weight, without universal guard, cutting tool and shoulder harness

Note:

 The standard equipment for the tool shown above may vary by country.

Cutting tool ......................................................................................... 1

Universal guard (=Protector)  

 

............................................................. 1

Shoulder harness with double shoulder straps 

 

................................... 1 (for 

EM2650UH, EM2651UH

)

Shoulder harness with single shoulder strap 

 

...................................... 1 (for 

EM2650LH, EM2651LH

)

Socket wrench 

 

.................................................................................... 1

Hex wrench (for M4) 

 

......................................................................... 1

Hex wrench (for M5) 

 

......................................................................... 1

Wire clamp (for tying cables) ............................................................. 2 (for 

EM2650UH

)

Oil bottle without oil or Oil bottle containing 80mL engine oil ......... 1

Accessory bag 

 

.................................................................................... 1

Metal blades [230mm (9") 3-tooth, 4-tooth, 8-tooth], Nylon cutting heads [Ultra auto 4, Bump & feed 4,

Bump & feed Z5], Gardening attachments (for 

EM2650LH, EM2651LH

)

620 (24-3/8)

330 (13)

Dimensions: mm (")

Width (W)
Height (H)

Length (L)

1,765 (69-1/2)

474 (18-5/8) 264 (10-3/8)

EM2650UH

EM2651UH

EM2650LH

EM2651LH

Rapid start

EM2650UH

EM2651LH

EM2651UH

Bike handle

*3

Loop handle

Bike handle

*3

5.5 (12.1)

5.2 (11.4)

5.6 (12.3)

6,630

7370

6,630

7370

Straight unleaded gasoline

*1

0.6 (20.3)

25.4 (1.5)

Max. output: kW
Max. torque: N.m

1.1 [at 5,500 min-

1

]

0.77 [at 7,000 min-

1

]

4-stroke

Recoil starter, with mechanical decompression

SAE10W-30 oil

in the Class SF or higher of API Classification

Diaphragm

Spindle thread size

Primer pump

Yes

Clutch

Yes

M10, Left-handed

Yes

Yes

No

No
No

No

No

Yes

No load speed

*2

: min.

-1 = 

rpm

Waist cushion

Model No.

T

ECHNICAL INFORMATION

EM2650UH

EM2651UH

EM2650LH

EM2651LH

L

L

H

H

W

W

Summary of Contents for EM2650UH















Reviews: