background image

1

CUSTOMER ACKNOWLEDGEMENT 

 

Hull Identification Number:______________________________ 
 
Retail customer acknowledges that they have received a copy of the Malibu Boats / Axis Owner’s 
Manual and that the dealer has reviewed the following with you: 

x

 

Where to obtain service 

x

 

Terms of the Limited Warranties (trailer, engine, boat, etc.) 

x

 

Proper and safe operation of the boat 

x

 

All sections of the Owner’s Manual(s) 

 
Retail customer acknowledges that the dealer has explained the operation and maintenance 
requirements of their trailer (as provided at the time of purchase) and that any trailer that is not 
provided as part of the OEM package at the time of manufacture, as well as any associated damage to 
the boat due to non-factory trailer usage, is specifically excluded from Warranty Coverage. 
 
Retail customer acknowledges that the warranty for this boat will be voided if unauthorized components 
are added to the boat after the retail purchase unless specifically authorized by Malibu Boats, LLC. This 
includes components such as Surf Gates™, fins, wedges, etc. 
 
 
 

Customer 

Name(s) 

    Customer 

Signature(s) 

Print Name __________________________ 

 

Sign Name ___________________________ 

Print Name __________________________  

 

Sign Name ___________________________ 

Print Name __________________________  

 

Sign Name ___________________________ 

 
Dealer 

Name(s) 

     Dealer 

Signature(s) 

Print Name __________________________ 

 

Sign Name ___________________________ 

Print Name __________________________  

 

Sign Name ___________________________ 

Print Name __________________________  

 

Sign Name ___________________________ 

 
 
 
 
Return of this form to Malibu Boats / Axis is a condition of Warranty Coverage. Selling Dealer must 
return this form to Malibu Boats / Axis via email (

warrantyregistrations@malibuboats.com

) during the 

Warranty Registration process.  
 
This form must also be completed as part of a Warranty transfer and returned to Malibu Boats before 
any remaining Warranty can be transferred to a subsequent owner.  

Summary of Contents for Boat 2014





































































































































































Reviews: