background image

SCREEN DISPLAYS

rpm

 Rev. counter screen

 Partial hour meter screen

 Hour meter screen

 Maintenance reminder screen

!

 Error code screen

SIGNAL LIGHTS

1 - Rev counter

2 - Engine coolant temperature

3 - Fuel level

4 - Forward/neutral/reverse lamp

5 - Orange air filter clogging lamp

6 - Orange hydraulic return oil clogging lamp

7 - Red general fault lamp

8 - Orange transmission oil temperature lamp

9 - Orange engine fault lamp

10 - Orange fuel level lamp

11 - Red battery charge lamp

12 - Not used

13 - Not used

14 - Not used

15 - Not used

16 -  Red engine oil pressure lamp

17 -  Red engine water temperature lamp

18 - Red parking brake lamp

19 - Red brake fluid level lamp

20 - Orange engine preheat lamp

21 - Water in fuel lamp

22 - Not used

23 - Indicator lights indicator lamp

24 - Front wheel alignment light

25 - Rear wheel alignment light

26 - Fast gear indicator light

27 -  Slow gear indicator light

28 -  Blue main beam headlights indicator 

lamp

CONTROL AND SIGNAL LIGHTS PANEL

RAZ

h

km/h

km/h

milesmph

pm

°C

°F

l/h

wait

notice

%

am

rpm

rpm

mph

!

16

17

15

14

13

12

11

10

9

8

7

6

5

4

1

3

2

18

19

20

21

22

23

25

27

26

28

24

MT 625 H EASY 49K ST3A S1

THIS MACHINE IS AN ALL TERRAIN FORKLIFT TRUCK DESIGNED TO OPERATE ON NATURAL OR UNDEVELOPED LAND, OR CONSTRUCTION SITES.

t

 IMPORTANT 

t

This document is a short recap on how to drive a forklift truck, and should in no way be a substitute for the manual required by Directive 2006/42/EC Annex I section 1.7.4, which should 

be read and understood by the operator beforehand and is available in the forklift truck’s cab.  

All instructions, including safety instructions, which are in the manual but are not included in this document should be implemented and enforced.  

The operator must have received proper training and must comply with the rules in force on road traffic.

BASIC INSTRUCTION SHEET No. 52519582EN (21/07/2017)

WEIGHT OF FORKLIFT TRUCK WITH STANDARD ATTACHMENT

(TRANSPORT POSITION)

 -  Unladen

 - At rated load

 - On front axle (unladen)

 - On rear axle (unladen)

 - On front axle (at rated load)

 - On rear axle (at rated load)

DRAWBAR PULL ON THE COUPLING HOOK

 - Unladen (slipping)

 - At rated load (transmission setting)

DIMENSIONS

 - A  1200 mm

 - B  2300 mm

 - C  991 mm

 - D  3894 mm

 - F  1492 mm

 - I  603 mm

 - U1  1920 mm

 - U2  2054 mm

B

D

C

A

U1 U2

I

F

TECHNICAL CHARACTERISTICS

SWITCHES

A - Warning lights

B – Rear fog lights.

C - Rotating beacon light option

D -  Front and rear working lights option

E - Option

F - Option

G - Neutralization of hydraulic movements

H - Option

I - Parkign brake

J -  Disabling the "aggravating" hydraulic 

movement cut-off

K -  Attachment hydraulic locking option

L - Option

M - Option

N -  Tiltig movement neutralization option

The location of the switches may 

vary depending on the options.

M

N

L

J

K

B

D

F

H

A

C

E

G

I

4710 kg

7210 kg

2260 kg

2450 kg

6600 kg

610 kg

3080 daN

3450 daN

This device warns the operator of the longitudinal stability 

limits of the forklift. Depending on the type of work 

required, the longitudinal stability limiter and warning 

device allows the operator to operate the lift truck in 

complete safety.

The A8 LED indicates that the forklift truck is at the 

authorized limit for longitudinal stability. If the light 

comes on, perform smooth hydraulic movements.

"HANDLING" MODE (use with forks)

By default, the device is in "HANDLING" MODE when the 

lift truck is started-up.

 "BUCKET"  MODE (use with bucket) 

Press this button, "BUCKET" MODE is confirmed 

by an audible beep and the lighting of the indicator lamp. 

Press this button again to return to "HANDLING" MODE.

 "SUSPENDED LOAD" MODE (use with hoist) (offering a higher margin of error) 

Press this button, the "SUSPENDED LOAD" MODE is confirmed by a beep 

and the lighting of the indicator lamp. 

 Press this button again or switch off the ignition with the ignition key to 

return to "HANDLING" MODE.

A8

LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE

Reviews: