LED Clock with USB Charging Station
Model: CL030055BK - CL030055WH
CL030055CO - CL030055GG
Thank you for your purchase of this clock with USB chargers.
The utmost care has gone into the design and manufacture of your
clock. Please read the instructions carefully and keep this manual
for future reference.
POWER ON
1. The clock must be powered by an AC adaptor, and 3 AAA batteries
for backup in the event of a power outage.
2. After powering on or resetting the clock, full segments of the LED
will be shown for 2 seconds, then it will revert to normal time mode
with time displayed.
Note:
If no display appears on the LED after inserting the batteries, press
the
[ RESET ]
key by using a pointed instrument.
MAIN FEATURES
The following keys (except
[ off ALARM on
] and
[ RESET ]
key)
will work only when the clock is powered by the AC adaptor.
1.
[ DOWN ]
key
- In time setting mode and alarm time setting mode, press to
decrease the value. Press and hold to speed up setting.
2.
[ UP ]
key
- In time setting mode and alarm time setting mode, press to
increase the value. Press and hold to speed up setting.
- Hold and press
[ UP ] or [ DOWN ]
key to set the alarm time.
- When the alarm is sounding, press to stop current alarm and
activate snooze mode.
4.
[ ALARM ON/OFF ]
slide switch
- Slide
[ ALARM ON/OFF ]
switch to turn on or turn off the alarm.
5. USB port x 2
6. AC jack
- Plug in the AC adaptor to power the clock.
7. Battery compartment
- Accommodates 3 AAA batteries for backup power.
8.
[ DISPLAY ON / OFF ]
key
- Press to turn on or turn off the LED clock display.
9.
[ RESET ]
key
- In case of malfunction, press by using a pointed instrument
to reset all the values.
10.
[ DIMMER LOW / HIGH ]
slide switch
- Slide to "
LOW
" position for dim display.
- Slide to
" HIGH "
position for bright display.
11.
[ TIME SET ]
key
- In normal time mode, press and hold to enter time setting
mode. Release to save and exit setting.
DISPLAY
Normal time mode
1. Normal time
Alarm time mode
1. Alarm time
2. Alarm mode / Alarm on
TIME SETTING
1. In normal time mode, press the
[ TIME SET ]
key without releasing
until the digit fl ashes, and press the
[ UP ]
or
[ DOWN ]
key to
set the desired value.
2. Release the
[ TIME SET ]
key to save and exit the setting mode.
Note:
Press and hold the
[ UP ]
or
[ DOWN ]
key to enable the fast forward
or backward setting.
SETTING THE ALARM
1. Press the
[ SNOOZE ]
key to enter the alarm time mode.
2. In normal time mode, press the
[ SNOOZE ]
key without releasing
until the digit fl ashes, and press the
[ UP ]
or
[ DOWN ]
key to set
the desired value.
time setting.
3. Release the
[ SNOOZE ]
key to save and exit the alarm
MANUAL
ENGLISH
1
3.
[ SNOOZE ]
key
C8392B_CL030055 Marathon A5_06.16.2016.indd 1
2016-06-16 9:09 AM