Marshall Amplification HST13, Owner'S Manual

OWNER'S MANUAL 

MODEL HST13 - VERTICAL TOASTER 

MANUFACTURER'S INTRODUCTION 

GENERAL SPECIFICATIONS

Height:

23.250"

Width:

19.875"

Depth:

15.250"

208V Single Phase 18.5 Amps

Electrical:

240V Single Phase 18.5 Amps

6 ft. 3 wire including ground,

with NEMA L6 -20P Plug

(Plug furnished by others on

Power Cord:

international units.)

130 lbs.

The Marshall High Speed Vertical Toaster produces a  grilled 
effect on the cut side of sandwich buns. The buns are 
inserted at the top of the unit and are pressed against a 
heated platen surface, which is covered by a replaceable 
toaster platen sheet. The spacing between the heated grill 
and the conveyor is adjustable to accommodate different 
thicknesses of buns. The buns are discharged onto a product 
slide at the bottom of the unit. The system is high speed and 
also variable in speed. Additionally, the heat controls are pre-
set at factory, which eliminates unauthorized tampering with 
heat settings. The flexibility of this toaster is unmatched 
allowing operators to produce the hottest buns in the shortest 
time.

Weight:

135168CH7 RV100599 
Copyright © 1999 Marshall Air Systems, Inc. 
All Rights Reserved.

Supplier Name:

MARSHALL AIR SYSTEMS, INC.

419 Peachtree Drive South

Address:

Charlotte, NC 28217

Serial #:

Date Received:

Date Installed:

Telephone #:

704-525-6230

Toll Free 

#:

800-722-3474 Customer Service

Fax #:

704-525-6229

Service Referral #:

800-722-3474

Local Service Name:

Local Service #:

Conveyor Speed

Setting: