IRC325
SPOT THERMAL
CAMERA
I
NSTRUCTION
M
ANUAL
ALWAYS READ THESE INSTRUCTIONS BEFORE
PROCEEDING
Thank you for buying one of our products. For safety and a full understanding
of its benefits please read this manual before use. Technical support is
available from 01923 441717 and support@martindale-electric.co.uk.
CONTENTS
1
Safety Information
1
1.1
Meaning of Symbols and Markings
1
1.2 Precautions
1
2 Introduction
3
2.1 Inspection
3
2.2 Description
3
2.3
Accessories
3
2.4 Battery
Installation
3
3 Operation
4
3.1
Low Battery Indication
4
3.2 Description
of
Display
4
3.3 Power
On/Off
5
3.4 Auto
Power
Off
5
3.5
Measurement and Scanning
5
3.6
Measurement Considerations
5
3.7 Emissivity
Values
6
4 Maintenance
8
4.1
Battery Replacement
8
4.2 Calibration
8
4.3 Cleaning
8
4.4
Repair & Service
9
4.5 Storage
Conditions
9
5 Warranty
10
Specifications
1. SAFETY INFORMATION
REMEMBER: SAFETY IS NO ACCIDENT
These instructions contain both information and cautions that
are necessary for the correct operation and maintenance of this
product. It is recommended that you read the instructions carefully
and ensure that the contents are fully understood.
Particular attention should be paid to the Precautions and
Technical Specifications.
Please keep these instructions for future reference. Updated
instructions and product information are available at: www.
martindale-electric.co.uk
1.1 Meaning of Symbols and Markings
Caution - refer to instructions
Equipment complies with relevant EU Directives
End of life disposal of this equipment should be in
accordance with relevant EU Directives.
1.2 Precautions
This product has been designed with your safety in mind, but
please pay attention to the following warnings and cautions before
use.
Warnings
The IRC325 must only be used by a skilled and competent person
who is familiar with the relevant regulations, the safety risks
1
2
involved and the consequent normal safe working practices, and
under the conditions and for the purposes for which it has been
constructed and specified.
Objects may be much hotter than indicated due to factors such as
emissivity.
Cautions
Avoid severe mechanical shock or vibration and extreme
temperature.
To avoid possible corrosion from leaking batteries, remove the
batteries if discharged, or when the unit is not in use for an
extended period.
