background image

S

AVE

T

HESE

I

NSTRUCTIONS

X-405 Manual Printed in USA 07/16/07

Address:

777 South Street

Newburgh, NY 12550-0606

TEL: 

(800) 835-7812
(845) 565-8850

FAX:

(800) 752-6883
(845) 565-9392

Internet Address

mastercraftusa.com

E-Mail:

techsupport@mastercraftusa.com

This extractor will afford you many years of trouble-free oper-
ating satisfaction, provided it is given proper care. All parts
have passed rigid quality control standards prior to their being
assembled to produce the finished product. 

Prior to packaging, this extractor was again inspected for
assurance of flawless assembly.

The manufacturer takes no responsibility for damages caused
to property or persons due to improper use of the extractor. 

Operating instructions must always be available for the oper-
ator. This extractor may only be operated by persons who
have been fully trained and authorized to use it.

All information and specifications printed in this manual are
current at the time of printing. However, because of our pol-
icy of continual product improvement, we reserve the right
to make changes at any time without notice.

Carefully check the shipping carton for signs of damage.
Remove the machine from the carton, if the machine is dam-
aged, notify the carrier immediately and request an inspec-
tion.  Only a visual examination will reveal damage that may
have occurred.

Be sure to keep the carton, packing inserts, packing list and
carrier's receipt until the inspector has verified your claim.
Our liability ceases when the shipment is picked up by the car-
rier. We will furnish any information needed to expedite the
claim process.

Check carton contents to ensure all accessories are included
which are listed as follows:

1) 1

1

/

2

x 15 Ft Solution/Recovery Hose

2) 5 Ft Stainless Steel Wand and 

12” Nozzle w/2 Spray Jets

P

AGE

1

S

AFETY

O

PERATION

M

AINTENANCE

M

ANUAL

X-405 C

ARPET

E

XTRACTOR

This unit is intended for commercial use.

R

EAD

A

LL

I

NSTRUCTIONS

B

EFORE

O

PERATING

R

EAD

A

ND

F

OLLOW

A

LL

I

NSTRUCTIONS

, W

ARNINGS AND

C

AUTIONS

B

EFORE

U

SING

T

HIS

E

XTRACTOR

Summary of Contents for X-405









Reviews: