background image

MT1450/MT1460/MT1463

1

Rev. 12/01/03

MT1450

5" Random

Orbital Palm

Sander

MT1460

6" Random

Orbital Palm

Sander

MT1463

6" Random

Orbital 3/32"

Palm Sander

Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:

• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.

MT1450

MT1460

MT1463

Air Pressure . . . . . . . . 90 PSI (6.2 Bar)  . . . 90 PSI (6.2 Bar)  . . .90 PSI (6.2 Bar)
Air Consumption  . . . . . . . . . 16 SCFM . . . . . . . . 16 SCFM  . . . . . . . .16 SCFM
Pad Size  . . . . . . . . . . . . . . . . . . . 5" . . . . . . . . . . . . . 6"  . . . . . . . . . . . . .6"
Maximum Speed  . . . . . . 12,000 RPM  . . . . . 12,000 RPM  . . . . . .12,000 RPM
Weight  . . . . . . . . . . . . . . . 1.60 Lbs.  . . . . . . . . 1.70 Lbs.  . . . . . . . .1.70 Lbs.
Length  . . . . . . . . . . . . . . . . . . 5.89"  . . . . . . . . . . 6.39"  . . . . . . . . . .6.39"
Height  . . . . . . . . . . . . . . . . . . 3.45"  . . . . . . . . . . 3.45"  . . . . . . . . . .3.45"
Vibration  . . . . . . . . . . . . . <3.5 M/S

2

 . . . . . . <3.5 M/S

2 . . . . . . . . .

<3.5 M/S

2

Sound Level  . . . . . . . . . . . . . 81 dBA  . . . . . . . . . 81 dBA  . . . . . . . . .81 dBA
Air Inlet . . . . . . . . . . . . . . . 1/4" NPT  . . . . . . . 1/4" NPT  . . . . . . . .1/4" NPT

S P E C I F I C A T I O N S

• Operating Instructions • Warning Information 

• Parts Breakdown

ALWAYS READ 
INSTRUCTIONS
BEFORE USING
POWER TOOLS

ALWAYS WEAR 
SAFETY GOGGLES

WEAR HEARING 
PROTECTION

AVOID 
PROLONGED 
EXPOSURE TO 
VIBRATION

Summary of Contents for MT1450









Reviews: