max mobility SmartDrive MX2, Quick Start Manual

IMPORTANT!

THE DEFAULT CONTROL MODE OF THE SMARTDRIVE MX2+ HAS CHANGED. 

IF THIS MODE IS NOT A PROPER FIT, ANOTHER MODE CAN BE SELECTED.

With your SmartDrive         

powered on, press the left but-

ton of the PushTracker to turn 

power assist ON. You will get a 

blue light  and a vibration.

In MX2+ mode, a DOUBLE tap 

will START UP the motor and 

ramp up its speed, and a SINGLE 

tap will coast at the current speed. 

Pushes do not power.

TO STOP, perform a DOUBLE 

tap to deactivate the motor and 

then grip both handrims to slow 

down the wheelchair.

Other modes will be different.

To steer while the motor 

is driving, lightly grip either 

handrim to turn in the direction 

you would like to go.

Same as you would without SmartDrive.

To turn while the motor is 

driving, grip either handrim 

firmly to make a sharp turn or to 

turn around completely. 

Same as you would without SmartDrive.

Be sure to download the 

PushTracker App from the Apple 

or Google Play Store on your 

smartphone.

SDMX2-QSG Rev. C

SmartDrive  MX2    PushTracker

Quickstart Guide

+

PLEASE READ THE USER’S MANUAL FOR BOTH THE SMARTDRIVE 

AND PUSHTRACKER BEFORE OPERATING EITHER DEVICE.

ALL WARNINGS AND SAFETY PRECAUTIONS MUST BE HEEDED.

www.max-mobility.com

www.pushtracker.com