background image

 

 

 

About this manual 

Thank you and congratulations on selecting this professional weather station! We are positive you will 
enjoy the benefits of accurate weather readings and the precise radio controlled time information that 
our instruments offer. 
This manual will guide you step-by-step through setting up your WS-1081PC Touch Screen Weather 

Use this manual to become familiar with your professional weather station, and 

reference. 

 

Glossary of Common Terms 

 

LCD   
“LCD” is an acronym for ”Liquid Crystal Display”.    This is a common type of display screen used in 
televisions, computers, watches, and digital clocks.   
   
BAROMETER & BAROMETRIC PRESSURE   

A barometer is a device that measures the pressure of the air pushing on it—this measurement is 
called the barometric pressure.    We don’t actually feel the barometric pressure because the air 
pressure is pushing equally in every direction.   

   

RELATIVE AIR PRESSURE 

 

Relative air pressure is the same as the barometric pressure.    The calculation of relative air pressure 
is a combination of the absolute air pressure and the altitude.   
   
ABSOLUTE AIR PRESSURE 

 

Absolute air pressure is the actual air pressure on the barometer without regard to altitude.   
   
INCHES OF MERCURY (inHg)

   

Inches of Mercury are the common unit of measurement for air pressure in the United States.   
   
HECTOPASCALS (hPa)

   

Hectopascals are the common units of measurement for air pressure in the International System (SI) 
of measurement.    The hectopascal holds the same value   

 

Important Note: 

Before inserting batteries, please carefully read the operation manual. 

 

The touch screen weather station includes a base station (receiver), a transmitter unit, one wind 
direction sensor, one wind speed sensor, one rain gauge, USB cable and a PC software package on 
CD-ROM. 

 

The Base Station is equipped with a Touch Screen LCD Monitor and allows the display of a large 
variety of time and weather data.   
Left Top LCD:  

 

IN-OUT temperature and humidity 

Right Top LCD: 

 

 

Wind and Rain measurement 

Left Middle LCD:   

Weather Forecast (Tendency) 

Right Middle LCD:  

Air Pressure and Air Pressure History 

Bottom Line LCD:   

Time and Date, Memory Data Usage 

 

Note: The presence of the "Alarm-On icon" in the section means that the particular alarm has been 
enabled.   

 
 

- 1 - 

WS  1081PC

TOUCH

 

SCREEN

 

WEATHER

 

STATION

 

(WIND

 

AND

 

AIR

 

PRESSURE)

 

 

 

Operation

 

Manual

 

-

Station device. 
save it for future 

Summary of Contents for WS-1081PC

























Reviews: