MP68158 high cover and frame for MP6815 trailer – Assembly Instructions
Date: 07/17
sales@maypoleltd.co.uk
www.maypoleltd.co.uk
This product contains:
Item A
Frame
2 off
Item B
Brace
2 off
Item C
Cover
1 off
Note that this product is only compatible with the Maypole MP6815 trailer
A
B
C
1. Start assembly by removing the black square bung found within each corner of the trailer.
Retain the bungs ensuring they are replaced when this accessory is not in use.
2. Locate item A within the holes into which the black bungs were previously fitted.
A
A
3. Item B is then assembled into the slots of item A.
Ensure the tabs pass through the tube fully!
B
B
