© MDM INCORPORATED
WWW.MDMINC.COM
Reliable. Efficient.
PROUDLY MADE
IN THE USA
®
TITAN
Read completely before you install or operate your new pump. Do not allow the motor to become submerged.
Never run dry. Never reverse rotation. Never exceed an internal case pressure of: 100 PSI.
INSTALLATION AND SERVICE MANUAL
P.1
S/N: XXXX-XXXXXX
XXXXXXXXX
Model
12000SEQ21
18000SEQ45
INLET
3”
3”
DISCHARGE
2”
2”
MAX FLOW (GPH)
12,500
18,400
MAX HEAD (FEET)
21’
45’
MAX POWER (WATTS)
845
2110
MAX CURRENT (AMPS @ 115 VOLTS)
9.6
27.1
MAX CURRENT (AMPS @ 230 VOLTS)
6
10.8
PHASE
SINGLE
SINGLE
MOTOR HP
3/4
3
MOTOR ENCLOSURE
TEFC
TEFC
TYPE:
END-SUCTION CENTRIFUGAL
MOTOR:
NEMA 143JM-215JM
PORT SIZE:
3” FLANGED INLET, 2” FLANGED DISCHARGE
HORSEPOWER:
3/4 HP, 3 HP
MATERIAL:
PHENOLIC RESIN BRACKET AND VOLUTE, NORYL
®
IMPELLER
HARDWARE:
STAINLESS STEEL
SEAL OPTIONS:
IMPENATRA
®
II NON-METALIC MECHANICAL SEAL:
CARBON GRAPHITE/VITON/SILICON CARBIDE
SILICON CARBIDE/VITON/SILICON CARBIDE, ETC.
OTHER OPTIONS:
EXTENSION COUPLED, PEDESTAL MOUNTED AND LONG-COUPLED
WITH PEDESTAL MOUNTED PUMP ON POLYMER BASEPLATE
PUMP ENDS INSERT: AND SEAL FLUSH PLANS AVAILABLE
ACCESSORIES:
500 CUBIC INCH BASKET STRAINER
®
*MOTORS ARE SUBJECT TO CHANGE DUE TO
AVAILABILITY OR SPECIFICATION REQUIREMENTS.
FILL IN FOR FUTURE REFERENCE:
MODEL:
________________________________________
SERIAL NUMBER:
_________________________________
DATE PURCHASED:
________________________________
COMPLETE AND MAIL YOUR WARRANTY REGISTRATION CARD INCLUDED WITH
THIS PRODUCT OR FILE ONLINE AT:
WWW.MDMINC.COM/PUMP-REGISTRATION
