background image

 
 
 
 
 
 
 
 

READ THIS MANUAL CAREFULLY 

 

GB 

05/05

 
 
 
 

 
 

MOTORHOE 

 
 
 
 

USER’S MANUAL

RL 7  

2+1 

   -   RL 7   

Monospeed

 

 

 

USER’S MANUAL

 
 

1.

 

FOREWORD  

 

 

 

Pag. 0 

2.

 

IDENTIFICATION AND MARKING 

 

Pag. 0 

3.

 

CONDITIONS AND USE 

 

 

Pag. 1 

4.

 

WARRANTY  

 

 

 

Pag. 1 

5.

 

MACHINE STARTING                                               Pag. 2 

6.

 

PACKAGE OPENING                                                 Pag. 2 

7.

 

WARNING SIGNS   

 

                               Pag. 2 

8.

 

CONTROL SIGNS               

 

 

Pag .3 

9.

 

SAFETY WARNINGS                     

 

Pag. 3-4 

10.

 

ENGINE START UP – ENGINE STOP                      Pag. 5 

11.

 

CONTROLS UTILIZATION                           

Pag. 6 

12.

 

ADJUSTMENTS 

   Pag. 

7-8 

13.

 

MAINTENANCE 

 

   Pag. 

14.

 

ASSEMBLY AND DISASSEMBLY 

 

Pag. 10 

15.

 

 TRANSPORT                                                              Pag. 11    

16.

 

 TECHNICAL FEATURES                                          Pag. 11 

17.

 

 EQUIPMENT AND ACCESSORIES                         Pag. 11 

18.

 

WARNINGS – CONFORMITY DECLARATION     Pag. 12 

ENGINE 

Use and maintenance instructions of the engine are 
mentioned in the relevant manual, copy of which is always 
supplied with every machine. 

 
 
 
 
 
 
 
 
 
 
 
 

 

All right reserved 

 

This manual cannot be either reproduced or released without the 
manufacturer’s prior written consent. 

 

PRINTED IN ITALY

 

 
 
 

1 - FOREWORD

 
 
 

 

 
 
 
 
 
 
 
 

 
 
 
 

This symbol is used to highlight an important safety information. If 
this information is ignored, people are in danger either of possible 
injures – even serious ones – or death.

 

IMPORTANT 

This term highlights special precautions to be taken in order not to 
damage the machine. 

 

 

 IMPORTANT NOTE 

 
Always mention the machine serial number when calling our technical service or when ordering spare parts. 
 

MARKING 

                                                                                                                                            Marking example. 
  
The CE  mark is on the engine support right side. 

 

 

 

 
 

2 – IDENTIFICATION AND MARKING

Summary of Contents for RL 7 2+1















Reviews: