Weight Max Drag
Line Capacity
Gear
Model Bearings
(oz.)
(lbs.)
Mono/Braid (lbs./yds.) IPT
Ratio
MCT10 4 (3+1)
8.8
5.5
4/185, 6/150, 8/130
21" 5.1:1
10/200, 15/135, 20/115
MCT20 4 (3+1)
8.9
5.5
6/185, 8/160, 10/115
21" 5.1:1
15/190, 20/145, 30/130
MCT30 4 (3+1)
10.2
11
8/225, 10/170, 12/130
23" 5.1:1
20/220, 30/190, 40/150
MCT40 4 (3+1)
10.6
11
10/235, 12/195, 14/160 23" 5.1:1
30/260, 40/195, 50/155
Congratulations on your purchase of a MegaCast
®
Spinning Reel! This reel is
manufactured with the highest quality components and has been extensively
tested to ensure that your day on the water is more productive. Please take a
moment to familiarize yourself with the integrated performance-enhancing
features of this reel before use. This will help you to optimize the reel's
settings and even further increase your fishing success. We wish you the best
of luck in your future angling adventures!
Graphite Frame and Rotor
The frame and rotor were designed to be lightweight, durable, and
corrosion-resistant.
Powerlock™ Instant Anti-Reverse
Your reel is equipped with our Powerlock instant anti-reverse system. This is a
special type of bearing that allows the handle to only turn forward. There is no
play in the handle, so you have complete control during the retrieve and no
“loose” feeling, which is important during stop-and-go retrieves.
Front Drag
Your reel is equipped with a drag system to help you fight stronger, faster fish
without the risk of breaking your line. The drag can be adjusted by turning the
knob on the front side or spool end of the reel. To properly set the drag, you
will need a spring scale. Your drag should be set at 25% of the test rating of
your line. Tie a loop in the end of your main line. Run it though the guides of
your rod and attach it to the hook on the scale. Pull the scale until it registers
25% of the line rating. If you are using 6 lb. test, then you should set your drag
to start slipping at 1.5 lbs.
Double-Anodized-Aluminum Spool
The spool has been double-anodized to provide years of corrosion resistance.
Care and Lubrication
Your new reel is designed to provide years of dependable service. But
like any other precision machine, periodic cleaning and maintenance is
required for continued peak performance.
Reels made today require both a lightweight oil and grease. Oil and grease
should be used sparingly; too much can have a negative impact on reel
performance. There are lightweight oils and grease made specifically for
fishing reels that can be found at basspro.com
As a rule of thumb, oils should be used to lubricate any moving part on the
reel, e.g. ball bearings, bushings, handle joints, bail springs, etc. Grease
should be used to lubricate the main drive gear and pinion gear.
We do not recommend using any multipurpose oils. Many of these oils have
properties that will attract dirt and dust to the internal parts. This may cause
excessive wear and reduce the life of the reel.
After each trip, the reel should be checked for dirt or sand. If it has been
exposed to saltwater, the spool should be removed and the entire reel rinsed in
freshwater. Dry with a soft cloth and lubricate the reel as described above.
Bass Pro Shops
®
Fishing Reel Limited Warranty
Bass Pro Shops will repair or replace (at our discretion) any Bass Pro Shops
reel which proves to be defective in workmanship or materials within one year
from the original date of purchase. You must save your dated sales receipt for
warranty validation. This warranty gives you specific legal rights, and you may
have other rights which vary from state to state or province to province.
For reels purchased through our catalogs or Bass Pro Shops online:
• For reel replacement only:
Return your reel postage prepaid with your
dated sales receipt to the Return Center address listed on your receipt.
• For reel repair only:
Return your reel postage prepaid with a copy of
your dated sales receipt as proof of purchase and warranty validation to
the Outdoor World Rod & Reel Repair
®
address below.
For reels purchased through Bass Pro Shops retail locations:
• For reel replacement only:
Return your reel (postage prepaid if
sending by mail) along with your dated sales receipt to the store from
which it was purchased.
• For reel repair only:
Return your reel postage prepaid with a copy of
your dated sales receipt as proof of purchase and warranty validation to
the Outdoor World Rod & Reel Repair address below.
Outdoor World Rod & Reel Repair
2300 E. Turner, Suite M
Springfield, MO 65803
This warranty does not cover lost parts, malfunctions, or damage due to
abuse, accidents, or normal wear. Failure to clean, lubricate, and provide
reasonable and necessary maintenance will void the warranty. Repairs needed
to your reel due to abnormal use or modification, or after warranty expiration,
are available for a reasonable charge from Outdoor World Rod & Reel Repair,
providing the reel is returned postage paid.
Except to the extent prohibited by applicable law, there are no warranties or
conditions, express or implied, other than those expressly set out herein. Bass
Pro Shops shall not, under any circumstances, be liable for an amount greater
than the actual purchase price of the product nor for any special, incidental, or
consequential damages suffered or incurred in connection with the product
and Bass Pro Shops does not assume, and does not authorize any person to
assume for it, any obligation or liability other than those expressly set out
herein.
1 FRONT DRAG SET
2 STOPPER SPRING
3 KEY WASHER X2
4 DRAG WASHER X3
5 EARED WASHER
6 SPOOL
7 LINE KEEPER
8 LINE KEEPER SCREW
9 CLICK WASHER
10 CLICK GEAR
11 CLICKER
12 SPOOL SHORT SCREW X2
13 SCREW
14 NUT
15 ROTOR FIX HOLDER
16 ROTOR
17 BAIL BOLDER
18 BAIL BOLDER & ARM LEVER SCREW X2
19 BAIL BOLDER CAP
20 CAP SCREW X2
21 LINE ROLLER SCREW
22 ARM LEVER
23 WASHER
24 LINE ROLLER
25 BUSHING
26 BAIL ARM SET
27 ARM LEVER SHAFT
28 SPRING
29 KICK LEVER
30 ARM LEVER CAP
31 MAIN SHAFT
32 BAIL BEARING FIX HOLDER
33 BALL BEARING
34 BALL BEARING KEEPER
35 INNER RING
36 ONE-WAY CLUTCH
37 ONE-WAY CLUTCH SPRING
38 SHAFT BALL BEARING
39 PINION GEAR
40 SHAFT BALL BEARING SCREW X3
41 ANTI-REVERSE SPRING
42 ANTI-REVERSE SWITCH
43 ANTI-REVERSE SHAFT
44 ANTI-REVERSE SCREW
45 BUSHING
46 MAIN GEAR
47 GEAR WASHER
48 BODY COVER BALL BEARING
49 BODY COVER
50 BODY COVER SCREW X2
51 BODY COVER SCREW
52 BODY COVER SHORT SCREW
53 HANDLE SET
54 OSCILLATING GEAR
55 SLIDER
56 SLIDER SCREW
57 HANDLE ARM CAP
58 WASHER
59 BODY
60 BALANCE SLIDER SCREW
61 BALANCE SLIDER
62 BODY CAP
63 CAP SCREW
MEGA CAST SPINNING REEL—MCT10, MCT20, MCT30, MCT40
NO. PART NAME
NO. PART NAME
NO. PART NAME
SPINNING REEL
MCT10, MCT20, MCT30, MCT40
