QUICK REFERENCE CARD
Understanding the User Interface Keypad
1. General Keypad Button Operation
General Operation of Keypad Buttons
Dispense coin from tube A
Dispense coin from tube B
Dispense coin from tube C
Dispense coin from tube D
Mode Button
– Access Service Mode
2. LED Light Codes
The 3 LEDs fitted on the changegiver provide up to the minute status
information. Please refer to the table below for more details.
On
Changegiver OK
Cycles
X 5
Normal power up sequence.
Changegiver OK
Blinks Off
Coin accepted / rejected
(Refer to Green LED Codes)
Flashing
Changegiver in Menu mode
(Refer to Green LED Codes)
On
Changegiver inhibited by VMC
Flashing
Changegiver requires attention
(Refer to Amber LED Codes)
Off
No Power to Changegiver.
Check power looms are connected & ensure
power is switched ON.
Alternating
Changegiver Faulty
(Remove from vending machine)
Green LED Codes
Mode Button
The Mode Button has limited functions on a EC6000
if the Mode Button is pressed you will see:
Slow Flash
Changegiver is in
Service Mode
.
Fast Flash
Mode + A, B, C or D buttons have
been pressed.
A
C
B
D
Part Number 79394xxxx EC6000
2007- Rev G1
1
2
3
