File:ert100-lcd-ir(eu).doc | November 10, 2011 | Rev. 2
Meitav-tec Ltd. (Contel group), 6 Sapir street, New Industrial Zone P.O.B 5221 Rishon-Lezion, 75150, Israel
Tel: +972-3-9626462, Fax: +972-3-9626620, Web: www.meitavtec.com, E-mail: support@meitavtec.com
ERT100-LCD-IR
Operating manual
1. Control Panel
1.1 ON\OFF
Press the On/Off button to activate/deactivate the thermostat.
1.2 Fan
Speeds
Press the Speed button to switch between fan speeds:
o
Low
speed
o
Medium
speed
o
High
speed
o
Auto
speed
1.3 Modes
Press the Mode button to switch between modes:
o
Cool
o
Cool & Auto fan
1
o
Heat
o
Heat & Auto fan
1
o
Auto
change-over
2
o
Auto change-over & Auto fan
1
o
Fan
only
X
1
– Auto Fan – The fan will stop when ther is no demand for cooling or heating.
X
2
– Auto change-over – The thermostat will automatically switch between cooling and heating –
according to the current temperature and the requested temperature.
1.4 Adjust
Temperature
Use the SET buttons (“+” or “-“) to change the requested temperature.
1.5 Timer
Use the timer to turn the thermostat On or Off (opposite to current status) after a set number of hours (0-12
Hours).
Press the Timer button – an arrow will apear next to the word “Timer”.
Use the SET buttons (“+” or “-“) to adjust the number of hours.
Press the Timer button again to return to normal display mode.
* The timer function will be cancelled in case of power failiure.
