background image

If you have any questions about configuring your Em50G or 
downloading data from the METER server, please contact METER at 
509-332-5600 or 

info@metergroup.com

.

]

2365 NE Hopkins Court 

Pullman, Washington 99163 

T: +1.509.332.5600

info@metergroup.com

 ©2009−2018 METER Group, Inc. USA 

13973-07 | 8.13.2018

Installing the software

Before taking the Em50G into the field, install DataTrac 3 on your 
designated field computer.  
1.  Insert your DataTrac 3 installation USB into your computer or 

visit 

metergroup.com/em50-support

 to install DataTrac 3 on your 

computer.

2.  Click “Run” to start the installer and follow the onscreen 

instructions.

NOTE:  The 1-year service plan activates when METER ships the instrument and not at 

time of installation.

Test Buttons

The Em50G has a TEST button and two indicator LEDs above the 
batteries for basic functionality testing. 

• After the TEST button is pushed, both the ERROR 
(red) and OK (green) lights will slowly blink on and off 
indicating that the testing is in progress.

OK

 

ERROR

• When the Em50G is sending data to METER’s server, 
the OK (green) light will blink rapidly.
• At the end of the testing, the OK (green) light will 
remain lit for approximately 20 s if everything is 
working properly.

• At the end of the testing, the ERROR (red) light 
will remains lit, a communication error is occuring. 
Perform a telemetry test to attempt to diagnose the 
problem.

OK

 

ERROR

OK

 

ERROR

About the Em50G

Thank you for purchasing an Em50G data logger.  The Em50G is a 
data collection device collects and stores data from up to five METER 
sensors.  Collected data are sent to the METER Data Service using 
cellular/mobile communication up to six times a day. You can access 
your data from the METER Data Service at any time with DataTrac 3 or 
the Em50G webviewer. 
 
The Em50G is configured using ECH2O

®

 Utility or DataTrac 3 software. 

DataTrac 3 is the preferred software package for the Em50G and will 
be the primary reference throughout this quick start guide.  To utilize 
ECH2O Utility or the Em50G webviewer, please consult the Em50G user 
manual.

Em50

®

G Data Logger

Quick Start Guide

Reviews: