background image

INSTALLATION INSTRUCTIONS FOR PART 95-7882B

APPLICATIONS

METRA.  The World’s best kits.

metraonline.com

1-800-221-0932

© COPYRIGHT 2004-2011  METRA ELECTRONICS CORPORATION 

REV

. 5/29/2013   INST95-7882B

CAUTION: Metra recommends disconnecting the  

negative battery terminal before beginning any 

installation. All accessories, switches, and especially 

air bag indicator lights must be plugged in before 
reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the 

aftermarket radio.

Table of Contents

• Double DIN radio provision

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS

 (sold separately)

Wiring Harness: • 70-1729 standard system harness • 70-1730 premium sound harness
Antenna Adapter: • 40-HD11 

• Panel removal tool • Phillips screwdriver  
• Socket Wrench

TOOLS REQUIRED

Honda Civic 2013-up

95-7882B

Dash Disassembly

 

Honda Civic 2013-up ........................................... 2

Kit Assembly

 

Double

 

DIN radio provision ................................... 3

• A) Radio Trim Panel • B) Brackets • C) 3 metal and 3 plastic Panel Clips  
• D) (4) #8 x 3/8” truss-head Phillips screws • E) (9) #8 x 3/8” pan-head Phillips screws  
• F) (3) #4 x 3/8” truss-head Phillips screws • G) 2) #8 x 1/2” pan-head Phillips screws

A

B

C

F

G

D

E

Summary of Contents for 95-7882B









Reviews: