background image

CAUTION! 

 All accessories, switches, climate 

controls panels, and especially air bag indicator 

lights must be connected before cycling the 

ignition. Also, do not remove the factory radio 

with the key in the on position, or while the 

vehicle is running. 

Metra. The World’s Best Kits.

®

 

MetraOnline.com 

© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION 

REV. 8/22/18 INST99-7378B

I N S TA L L AT I O N I N S T R U C T I O N S

99-7378B

KIT FEATURES

•  ISO DIN radio provision with pocket
•  Painted scratch-resistant matte black

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (2) #8 x 3/8” Phillips screws

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

TABLE OF CONTENTS

Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

 (sold separately)

Wiring Harness: 70-7306
Antenna Adapter: 40-KI11
Steering wheel control interface: ASWC-1

A

C

B

D

Kia 

Sportage LX

 

(with base radio†) 

2017-up*

*Visit 

MetraOnline.com

 for up-to-date vehicle specific applications.

† Base radio is an non-touchscreen radio

Summary of Contents for 99-7378B

Page 1: ...7378B KIT FEATURES ISO DIN radio provision with pocket Painted scratch resistant matte black KIT COMPONENTS A Radio trim panel B Radio brackets C Pocket D 2 8 x 3 8 Phillips screws TOOLS REQUIRED Panel removal tool Phillips screwdriver TABLE OF CONTENTS Dash Disassembly 2 Kit Preparation 3 Kit Assembly 3 WIRING ANTENNA CONNECTIONS soldseparately Wiring Harness 70 7306 Antenna Adapter 40 KI11 Steer...

Page 2: ...ps screw exposed Figure B 3 Unclip and remove the dash panel above the glove box Figure C DASH DISASSEMBLY 4 Remove 2 Phillips screws securing the radio display and a c vent panel then unclip and remove the panel Figure D 5 Remove 4 Phillips screws securing the radio Slide the radio out then unplug and remove the radio Figure E Continue to Kit Preparation Figure D Figure E Figure A Figure B Figure...

Page 3: ...8 x 3 8 Phillips screws provided Figure A 2 Remove the metal DIN sleeve and trim ring from the aftermarket radio 3 Slide the radio into the bracket pocket assembly then secure it to the assembly using the screws supplied with the radio Figure B 4 Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio Metra recommends using the proper...

Page 4: ...nicians IMPORTANT If you are having difficulties with the installation of this product please call our Tech Support line at 1 800 253 TECH Before doing so look over the instructions a second time and make sure the installation was performed exactly as the instructions are stated Please have the vehicle apart and ready to perform troubleshooting steps before calling Metra The World s Best Kits Metr...

Reviews: