Microtek ScanMaker i800 Scanning Manual Download | Manualshive

Page: 1 / 22

background image

Before

Before

After

Copyright © 2005 Microtek International, Inc. http://www.microtek.com
I49-003964 A, August 2005

About This Scanning Guide

This Scanning Guide shows you how to use ScanWizard Pro, the professional-grade
scanning software included with the ScanMaker i800. While the Guide lays out only
the most basic scanning scenarios on these pages, ScanWizard Pro can be used for a
wide range of applications involving sophisticated functionalities and advanced
levels of image manipulation and control.

For information on more advanced scanning scenarios, refer to the ScanWizard Pro
User's Guide. Additional information can also be found in the ScanWizard Pro
Reference Manual for detailed discussions of individual scanning commands and
options. Both documents are in Adobe Acrobat PDF format, available for viewing and
printing from your Microtek ScanMaker i800 Pro CD-ROM.

Contents

About This Scanning Guide ...................................................................... 1
Installing Software .................................................................................... 2

Positioning Transparent Film .................................................................... 3

A. Using the EZ-Lock 35mm Slide Holder ....................................... 4
B. Using the EZ-Lock 35mm Filmstrip Holder ................................. 5

C. Using the EZ-Lock 6 x 22 cm (120) Film Holder ........................... 6
D. Using the EZ-Lock 4

"

x 5

"

Film Holder ......................................... 7

E. Using the Film Alignment Ruler .................................................. 8

Scanning Guide

ScanMaker i800 Scanning Scenarios with ScanWizard Pro

Scanning Scenarios ................................................................................... 9
Scanning Regular, Non-Damaged Photos ............................................ 10
Scanning Damaged Photos .................................................................... 13

Scanning Regular, Non-Damaged Positive Film ................................... 16
Scanning Regular, Non-Damaged Negative Film .................................. 18
Scanning Damaged Film ......................................................................... 20

1
2
3
...
»

Summary of Contents for ScanMaker i800























Reviews:

No comments

Related manuals for ScanMaker i800

Brand: Wasp Pages: 466

Brand: Cobra Pages: 9

Brand: VORMOR Pages: 11

Copiscan 8000 Plus Series

Brand: Bell and Howell Pages: 94

Brand: IRIScan Pages: 12

Brand: Radio Shack Pages: 44

Brand: NDI Pages: 50

Brand: Uniden Pages: 64

Brand: Uniden Pages: 32

Brand: GRAPHTEC Pages: 84

Brand: Panasonic Pages: 325

Brand: Konnwei Pages: 40

Brand: anhanced vision Pages: 40

Brand: NCR Pages: 9

XINO S700 Series

Brand: Janich & Klass Pages: 149

Magic InstaScan PRO PDSWF-ST48-VP

Brand: VuPoint Pages: 18

Brand: VuPoint Pages: 2

Magic Wand PDSDK-ST470-VP-BX2

Brand: VuPoint Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands