EN - English - Quick Guide:
This "mANTBox 52 15s" series Quick Guide covers models: RBD22UGS-5HPacD2HnD-15S (mANTBox 52 15s).
This is a wireless network device. You can find the product model name on the case label (ID).
Please visit the user manual page on
for the full up to date user manual. Or scan the QR code with your mobile phone.
Technical specifications, brochures and more info about products at
Configuration manual for software in your language with additional information can be found at
If you need help with configuration, please seek a consultant
https://mikrotik.com/consultants
This Device accepts input of 48V DC power adapter, which is provided in the original packaging of this device. This Device can be powered
using DC Jack or PoE injector (Provided in the packaging).
First steps:
Open the cover;
Connect Ethernet cable from your computer to the Ethernet port;
Plug the device into the power source;
Download WinBox configuration tool
;
Default IP: 192.168.88.1, user name:
and there is no password, or use
admin
Neighbors tab and connect through MAC address;
Once connected configure the device, so it has an active Internet connection
;
Upgrade the RouterOS software to the latest version
Connect again and in QuickSet menu choose your country, to apply country regulation settings;
Set the antenna gain, depending on the antenna used;
Set up your wireless network password, the password must be at least eight symbols;
Set up your router password in the bottom field to the right and repeat it, it will be used to login next time.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the
Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware and configuration or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own
risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate
measures!
This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an
Exposure to Radio Frequency Radiation:
uncontrolled environment. This MikroTik device should be installed and operated no closer than 25 centimeters from your body, occupational user, or the general
public.
Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.
BG - Български. Бързо ръководство:
Това бързо ръководство за серията "mANTBox 52 15s" обхваща модели: RBD22UGS-5HPacD2HnD-15S (mANTBox 52 15s).
Това е устройство за безжична мрежа. Можете да намерите името на модела на продукта на етикета на регистъра (ID).
Моля, посетете страницата с ръководството за потребителя на
за пълното актуализирано ръководство за употреба.
Или сканирайте QR кода с мобилния си телефон.
Технически спецификации, брошури и повече информация за продуктите на
Ръководство за конфигуриране на софтуер на вашия език с допълнителна информация можете да намерите на
Ако имате нужда от помощ при конфигуриране, моля, потърсете консултант
https://mikrotik.com/consultants
Това устройство приема вход на 48V DC адаптер за захранване, който се предлага в оригиналната опаковка на това устройство. Това устройство може
да се захранва с помощта на DC Jack или PoE инжектор (Предлага се в опаковката).
Първи стъпки:
This device needs to be upgraded to RouterOS v6.46 or the latest stable version, to ensure compliance with local authority regulations!
It is the end users responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be installed according to instructions.
Това устройство трябва да бъде надстроено до RouterOS v6.46 или най-новата стабилна версия, за да се гарантира спазването на местните
наредби!
Крайните потребители са задължени да следват местните разпоредби, включително работа в рамките на законни честотни канали, изходна
мощност, изисквания за окабеляване и изисквания за динамичен избор на честота (DFS). Всички радиоустройства MikroTik трябва да бъдат
инсталирани съгласно инструкциите.
